Find a Service Center
Alternate Products
- 65 mm Inside Diameter
- 140 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Seal Material | None |
| Radial Internal Clearance Specification | Normal Clearance |
| Contact Angle | 0° |
| icNumber | 7699743 |
| Outer Ring Width | 33 mm |
| I.D. | 65 mm |
| Width | 33.000 mm |
| Snap Ring | Yes |
| Series | BL3 |
| Locking Device | No Locking Device |
| Seal Type | Unsealed |
| Internal Clearance | C3 |
| Limiting Speed - Oil | 5600 rpm |
| Cage Type | Metal |
| Bore Type | Straight |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Static Load Rating [Max] | 89500 N |
| Closure Type | Open |
| Dynamic Load Rating | 103000 N |
| Precision | Standard |
| Preload Level | None |
| O.D. Type | Straight w/ Snap Ring |
| Limiting Speed - Grease | 4800 rpm |
| Rows of Balls | Single |
| Cage Material | Pressed Steel |
| Capacity | Maximum Capacity |
| Ball Material | Steel |
| Radial Internal Clearance | Normal |
| Bearing Type | Radial and Deep Groove |
| Enclosure | Open |
| Inch/Metric | Metric Bore |
| O.D. | 140 mm |
| Corner Radius [Min] | 2.1 mm |
| Weight | 5.178 LB |
| EAN or UPC | 29176032547 |
