Find a Service Center
Boston Gear
710-40-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805881
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Movement could cause the pin to unscrew and drop the load
- Always stand clear of loads being lifted
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Bolt Center | 3 3/4" x 2 7/8" |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Base Mounting Attachment | No Base |
| Standard | AGMA Service Class I |
| Frame Size | Shaft Input, Not a C-Face |
| Input (Shaft or Bore) Size | 3/8 in |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Output Torque @ RPM | 129 in lb @ 1150 rpm, 151 in lb @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input Configuration | Shaft Input |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Box Length | 3 1/4 in |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Box Height | 3 5/8 in |
| Material | Cast Iron, Standard Paint |
| Box Width | 2 1/2 in |
| Use With | 710 |
| Style | Right Angle |
| Max. Input HP @ 100 rpm | 0.011 hp |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Input HP @ RPM | 0.081 hp @ 1150 rpm, 0.17 hp @ 1750 rpm |
| Output Shaft Projection | Solid Left Output |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Media Mapping Output | G |
| Washdown Duty | No |
| Ratio | 40:1 |
| Base to Centerline of Output Shaft | 1 5/16 in |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Torque Out @ 1150 rpm | 129 in lb |
| Shaft Assembly Code | G |
| Motor Application | General Purpose |
| Housing Material | Cast Iron |
| Output Speed | 43.8 rpm |
| Worm Position | Universal |
| Lubrication | None |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Input Motor HP | 0.17 |
| Reduction Type | Single |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Output (Shaft or Bore) Size | 1/2 in |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Fan Cooled | No |
| Torque Out @ 1750 rpm | 151 in lb |
| Output Bore Shaft Dia. | 0.5 in |
| Bolt Center Length x Bolt Center Width | 3 3/4 in x 2 7/8 in |
| Family Name | Std Unit |
| Output Torque | 151 lb-in |
| Rated Efficiency | 62% |
| Center Distance Code | 710 |
| Input Power Rating | 0.17 hp, 0.127 kW |
| Frame | N/A |
| Output Configuration | Left Output |
| Series | 700 |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.08333333 hp @ 1800 rpm |
| Center Distance | 1 in |
| Weight | 6.1 LB |
| EAN or UPC | 781711516003 |
