Find a Service Center
Boston Gear
7713-5-G
700 Series 5:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101808989
- 1 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output (Shaft or Bore) Size | 5/8 in |
| Motor Application | General Purpose |
| HP @ RPM | 1 hp @ 1800 rpm |
| Bolt Center Length x Bolt Center Width | 4 3/8 in x 3 5/16 in |
| Max. Input HP @ 100 rpm | 0.091 hp |
| Housing Material | Cast Iron |
| Output Bore Shaft Dia. | 0.625 in |
| Box Height | 4 21/32 in |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Frame Size | Shaft Input, Not a C-Face |
| Input HP @ RPM | 0.84 hp @ 1150 rpm, 1.39 hp @ 1750 rpm |
| Horsepower Input Capacity | 1.25 hp |
| Center Distance | 1.33 in |
| Style | Right Angle |
| Reduction Type | Single |
| Series | 700 |
| Lubrication | None |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Torque Out @ 1150 rpm | 200 in lb |
| Input Configuration | Shaft Input |
| Frame | N/A |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Shaft Assembly Code | G |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Input Power Rating | 1.39 hp, 1.037 kW |
| Bolt Center | 4 3/8 in x 3 5/16 in |
| Base to Centerline of Output Shaft | 1 23/32 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Box Width | 2 7/8 in |
| Material | Cast Iron, Standard Paint |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Fan Cooled | No |
| Output Torque | 235 lb-in |
| Output Speed | 350 rpm |
| Standard | AGMA Service Class II |
| Family Name | Std Unit |
| Torque Out @ 1750 rpm | 235 in lb |
| Output Torque @ RPM | 200 in lb @ 1150 rpm, 235 in lb @ 1750 rpm |
| Use With | 713 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input Motor HP | 1 |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Rated Efficiency | 94% |
| Washdown Duty | No |
| Media Mapping Output | G |
| Ratio | 5:1 |
| Output Configuration | Left Output |
| Box Length | 4 1/4 in |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Base to Centerline of Input Shaft | 3 3/64 in |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Center Distance Code | 713 |
| Output Shaft | Solid |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Input (Shaft or Bore) Size | 1/2 in |
| Weight | 11.1 LB |
| EAN or UPC | 781711516065 |
