Find a Service Center
Boston Gear
7726-10-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805886
- 3 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Axial rating will reduce by 50% unless an EP (Extreme Pressure) grease or oil lubrication is used.
| Input HP @ RPM | 2.82 hp @ 1150 rpm, 3.94 hp @ 1750 rpm |
| Center Distance | 2.625 in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Box Height | 8 in |
| Standard | AGMA Service Class II |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Motor Application | General Purpose |
| Output Torque @ RPM | 1345 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Center Distance Code | 726 |
| Use With | 726 |
| Series | 700 |
| Rated Efficiency | 95% |
| Output Torque | 1345 lb-in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Box Width | 4 7/16 in |
| Box Length | 7 3/8 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Output Bore Shaft Dia. | 1.125 in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Output RPM @ 1750 rpm Input | 175 rpm |
| HP @ RPM | 3 hp @ 1800 rpm |
| Output Configuration | Left Output |
| Bolt Center | 8 in x 5 1/4 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Output Shaft | Solid |
| Reduction Type | Single |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Fan Cooled | No |
| Input Motor HP | 3 |
| Housing Material | Cast Iron |
| Material | Cast Iron, Standard Paint |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Input Power Rating | 3.94 hp, 2.938 kW |
| Input (Shaft or Bore) Size | 3/4 in |
| Output Speed | 175 rpm |
| Washdown Duty | No |
| Style | Right Angle |
| Torque Out @ 1150 rpm | 1390 in lb |
| Lubrication | None |
| Frame | N/A |
| Frame Size | Shaft Input, Not a C-Face |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Base Mounting Attachment | No Base |
| Torque Out @ 1750 rpm | 1345 in lb |
| Media Mapping Output | G |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Input Configuration | Shaft Input |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Output Shaft Projection | Solid Left Output |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Family Name | Std Unit |
| Shaft Assembly Code | G |
| Worm Position | Universal |
| Ratio | 10:1 |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Max. Input HP @ 100 rpm | 0.37 hp |
| Weight | 41.1 LB |
| EAN or UPC | 781711517383 |
