Find a Service Center
Boston Gear
7726-60-J
700 Series 60:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101856444
- 0.75 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input (Shaft or Bore) Size | 3/4 in |
| Output Torque @ RPM | 1385 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Series | 700 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Fan Cooled | No |
| Output Bore Shaft Dia. | 1.125 in |
| Rated Efficiency | 72% |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Max. Input HP @ 100 rpm | 0.1 hp |
| Torque Out @ 1150 rpm | 1390 in lb |
| Output Shaft | Solid |
| Washdown Duty | No |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Box Length | 7 3/8 in |
| Standard | AGMA Service Class I |
| Box Height | 8 in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Base Mounting Attachment | No Base |
| Frame Size | Shaft Input, Not a C-Face |
| Use With | 726 |
| Torque Out @ 1750 rpm | 1385 in lb |
| Material | Cast Iron, Standard Paint |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Input Motor HP | 0.75 |
| Output Speed | 29.2 rpm |
| Input Power Rating | 0.89 hp, 0.664 kW |
| Box Width | 4 7/16 in |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Shaft Assembly Code | J |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Family Name | Std Unit |
| Center Distance Code | 726 |
| Input HP @ RPM | 0.64 hp @ 1150 rpm, 0.89 hp @ 1750 rpm |
| Reduction Type | Single |
| Motor Application | General Purpose |
| Ratio | 60:1 |
| Housing Material | Cast Iron |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Media Mapping Output | J |
| Output Shaft Projection | Solid Right Output |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Style | Right Angle |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Worm Position | Universal |
| Center Distance | 2.625 in |
| Input Configuration | Shaft Input |
| Output Configuration | Right Output |
| Output Torque | 1385 lb-in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Bolt Center | 8 in x 5 1/4 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Frame | N/A |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Weight | 41.1 LB |
| EAN or UPC | 781711517611 |
