Find a Service Center
Boston Gear
F710-10-B4-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101806195
- 0.33 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Box Width | 3 11/32 in |
| Output Shaft | Solid |
| Output Torque @ RPM | 118 in lb @ 1150 rpm, 138 in lb @ 1750 rpm |
| Torque Out @ 1750 rpm | 138 in lb |
| Fan Cooled | No |
| Output (Shaft or Bore) Size | 1/2 in |
| Motor Application | General Purpose |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Family Name | F |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Base Mounting Attachment | No Base |
| Motor Frame Size | B442CZ |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Series | 700 |
| Media Mapping Style | F |
| Motor HP | 0.3333 hp |
| Base to Centerline of Output Shaft | 1.31 in |
| Housing Material | Cast Iron |
| Frame Size | 42CZ |
| Box Height | 3 5/8 in |
| Material | Cast Iron, Standard Paint |
| Reduction Type | Single |
| Torque Out @ 1150 rpm | 118 in lb |
| Use With | 710 |
| Base | No |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Frame | 42CZ |
| Center Distance Code | 710 |
| Media Mapping Output | G |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bore Code | B4 |
| Output Configuration | Left Output |
| Washdown Duty | No |
| Lubrication | None |
| Shaft Assembly Code | G |
| Input Configuration | C-Face Quilled |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Rated Efficiency | 87% |
| Standard | AGMA Service Class II |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Box Length | 4 1/4 in |
| Ratio | 10:1 |
| Output Torque | 138 lb-in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Base to Centerline of Input Shaft | 2.3125 in |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Input Motor HP | 0.33 |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Input (Shaft or Bore) Size | 1/2 in |
| Output Bore Shaft Dia. | 0.5 in |
| Input HP @ RPM | 0.23 hp @ 1150 rpm, 0.44 hp @ 1750 rpm |
| Input Power Rating | 0.44 hp, 0.328 kW |
| Style | Right Angle |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Center Distance | 1 in |
| Output Speed | 175 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Bolt Center | 2 5/8" x 1 11/16" |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Weight | 10.1 LB |
| EAN or UPC | 781711518526 |
