Find a Service Center
Boston Gear
F710-10-B4-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809370
- 0.33 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Bolt Center | 2 5/8" x 1 11/16" |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Input Power Rating | 0.44 hp, 0.328 kW |
| Rated Efficiency | 87% |
| Fan Cooled | No |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Center Distance | 1 in |
| Output Shaft | Solid |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Output Torque | 138 lb-in |
| Base Mounting Attachment | No Base |
| Lubrication | None |
| Motor HP | 0.3333 hp |
| Housing Material | Cast Iron |
| Keyway Size | 1/8 x 1/16 |
| Family Name | F |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Base | No |
| Media Mapping Style | F |
| Torque Out @ 1150 rpm | 118 in lb |
| Shaft Assembly Code | H |
| Bore Code | B4 |
| Reduction Type | Single |
| Output Torque @ RPM | 118 in lb @ 1150 rpm, 138 in lb @ 1750 rpm |
| Torque Out @ 1750 rpm | 138 in lb |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Center Distance Code | 710 |
| Media Mapping Output | H |
| Style | Right Angle |
| Motor Frame Size | B442CZ |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Base to Centerline of Output Shaft | 1.31 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Box Length | 4 1/4 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Standard | AGMA Service Class II |
| Input Motor HP | 0.33 |
| Output (Shaft or Bore) Size | 1/2 in |
| Output Speed | 175 rpm |
| Ratio | 10:1 |
| Input Configuration | C-Face Quilled |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Washdown Duty | No |
| Motor Application | General Purpose |
| Series | 700 |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Box Width | 3 11/32 in |
| Box Height | 3 5/8 in |
| Output Bore Shaft Dia. | 0.5 in |
| Frame | 42CZ |
| Input (Shaft or Bore) Size | 1/2 in |
| Use With | 710 |
| Output Configuration | Left & Right Output |
| Material | Cast Iron, Standard Paint |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Frame Size | 42CZ |
| Input HP @ RPM | 0.23 hp @ 1150 rpm, 0.44 hp @ 1750 rpm |
| Output Shaft Projection | Solid Double Projecting Output |
| Weight | 10.1 LB |
| EAN or UPC | 781711518533 |
