Find a Service Center
Boston Gear
F710-10-B5-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101800848
- 0.33 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Not recommended for use with bolted clamps
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Washdown Duty | No |
| Box Length | 4 1/4 in |
| Frame Size | 56C |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Output (Shaft or Bore) Size | 1/2 in |
| Rated Efficiency | 87% |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Lubrication | None |
| Bolt Center | 2 5/8" x 1 11/16" |
| Housing Material | Cast Iron |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Motor Application | General Purpose |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Reduction Type | Single |
| Input Configuration | C-Face Quilled |
| Input Power Rating | 0.44 hp, 0.328 kW |
| Torque Out @ 1750 rpm | 138 in lb |
| Family Name | F |
| Series | 700 |
| Torque Out @ 1150 rpm | 118 in lb |
| Base to Centerline of Output Shaft | 1.31 in |
| Center Distance | 1 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Bore Code | B5 |
| Motor HP | 0.3333 hp |
| Output Speed | 175 rpm |
| Output Torque | 138 lb-in |
| Input Motor HP | 0.33 |
| Keyway Size | 3/16 x 3/32 |
| Material | Cast Iron, Standard Paint |
| Use With | 710 |
| Output Configuration | Left & Right Output |
| Ratio | 10:1 |
| Input HP @ RPM | 0.23 hp @ 1150 rpm, 0.44 hp @ 1750 rpm |
| Box Width | 3 11/32 in |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Output Shaft Projection | Solid Double Projecting Output |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Media Mapping Output | H |
| Frame | 56C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Center Distance Code | 710 |
| Output Bore Shaft Dia. | 0.5 in |
| Motor Frame Size | B556C |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Standard | AGMA Service Class II |
| Style | Right Angle |
| Media Mapping Style | F |
| Box Height | 3 5/8 in |
| Fan Cooled | No |
| Base Mounting Attachment | No Base |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Shaft Assembly Code | H |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Output Torque @ RPM | 118 in lb @ 1150 rpm, 138 in lb @ 1750 rpm |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Base | No |
| Weight | 10.1 LB |
| EAN or UPC | 781711598306 |
