Find a Service Center
Boston Gear
F710-30-B4-H
700 Series 30:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101808428
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Shaft Assembly Code | H |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Application | General Purpose |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Worm Position | Universal |
| Input Configuration | C-Face Quilled |
| Frame Size | 42CZ |
| Input Motor HP | 0.17 |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.125 hp @ 1800 rpm |
| Output Speed | 58.3 rpm |
| Output Torque | 150 lb-in |
| Motor Frame Size | B442CZ |
| Bore Code | B4 |
| Series | 700 |
| Lubrication | None |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Output Shaft Projection | Solid Double Projecting Output |
| Input HP @ RPM | 0.1 hp @ 1150 rpm, 0.2 hp @ 1750 rpm |
| Base | No |
| Bolt Center | 2 5/8" x 1 11/16" |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Base Mounting Attachment | No Base |
| Ratio | 30:1 |
| Box Length | 4 1/4 in |
| Torque Out @ 1150 rpm | 133 in lb |
| Box Width | 3 11/32 in |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Input Power Rating | 0.2 hp, 0.149 kW |
| Media Mapping Output | H |
| Reduction Type | Single |
| Center Distance Code | 710 |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Rated Efficiency | 69% |
| Output (Shaft or Bore) Size | 1/2 in |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Media Mapping Style | F |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Family Name | F |
| Box Height | 3 5/8 in |
| Base to Centerline of Output Shaft | 1.31 in |
| Max. Input HP @ 100 rpm | 0.013 hp |
| Keyway Size | 1/8 x 1/16 |
| Torque Out @ 1750 rpm | 150 in lb |
| Housing Material | Cast Iron |
| Fan Cooled | No |
| Frame | 42CZ |
| Style | Right Angle |
| Material | Cast Iron, Standard Paint |
| Output Shaft | Solid |
| Use With | 710 |
| Output Configuration | Left & Right Output |
| Output Torque @ RPM | 133 in lb @ 1150 rpm, 150 in lb @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Standard | AGMA Service Class I |
| Motor HP | 0.1667 hp |
| Washdown Duty | No |
| Center Distance | 1 in |
| Output Bore Shaft Dia. | 0.5 in |
| Input (Shaft or Bore) Size | 1/2 in |
| Weight | 10.1 LB |
| EAN or UPC | 781711518625 |
