Find a Service Center
Boston Gear
F710-30-B5-J
700 Series 30:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101800849
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Buna-N is not recommended for use with CIP Sanitizing Agent OXONIA – use EPDM or silicone
| Torque Out @ 1150 rpm | 133 in lb |
| Output Torque | 150 lb-in |
| Base | No |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Media Mapping Output | J |
| Output Shaft | Solid |
| Use With | 710 |
| Style | Right Angle |
| Box Length | 4 1/4 in |
| Base to Centerline of Output Shaft | 1.31 in |
| Max. Input HP @ 100 rpm | 0.013 hp |
| Bore Code | B5 |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Height | 3 5/8 in |
| Standard | AGMA Service Class I |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Keyway Size | 3/16 x 3/32 |
| Output Shaft Projection | Solid Right Output |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Shaft Assembly Code | J |
| Reduction Type | Single |
| Center Distance Code | 710 |
| Output Speed | 58.3 rpm |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Input Power Rating | 0.2 hp, 0.149 kW |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Width | 3 11/32 in |
| Lubrication | None |
| Bolt Center | 2 5/8" x 1 11/16" |
| Media Mapping Style | F |
| Motor Application | General Purpose |
| Base Mounting Attachment | No Base |
| Family Name | F |
| Frame Size | 56C |
| Housing Material | Cast Iron |
| Output Configuration | Right Output |
| Series | 700 |
| Fan Cooled | No |
| Output Torque @ RPM | 133 in lb @ 1150 rpm, 150 in lb @ 1750 rpm |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Material | Cast Iron, Standard Paint |
| Center Distance | 1 in |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Torque Out @ 1750 rpm | 150 in lb |
| Frame | 56C |
| Worm Position | Universal |
| Rated Efficiency | 69% |
| Ratio | 30:1 |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Washdown Duty | No |
| Motor HP | 0.17 hp |
| Input Configuration | C-Face Quilled |
| Output (Shaft or Bore) Size | 1/2 in |
| Motor Frame Size | B556C |
| Input HP @ RPM | 0.1 hp @ 1150 rpm, 0.2 hp @ 1750 rpm |
| Input Motor HP | 0.17 |
| Output Bore Shaft Dia. | 0.5 in |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.125 hp @ 1800 rpm |
| Weight | 10.1 LB |
| EAN or UPC | 781711598412 |
