Boston Gear
F710-40-B4-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805897
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Rated Efficiency | 62% |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Media Mapping Style | F |
| Ratio | 40:1 |
| Use With | 710 |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Box Length | 4 1/4 in |
| Series | 700 |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Input Motor HP | 0.17 |
| Input Configuration | C-Face Quilled |
| Output Speed | 43.8 rpm |
| Housing Material | Cast Iron |
| Input Power Rating | 0.17 hp, 0.127 kW |
| Bore Code | B4 |
| Bolt Center | 2 5/8" x 1 11/16" |
| Output Shaft | Solid |
| Torque Out @ 1150 rpm | 129 in lb |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Box Width | 3 11/32 in |
| Center Distance Code | 710 |
| Output Bore Shaft Dia. | 0.5 in |
| Standard | AGMA Service Class I |
| Worm Position | Universal |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.08333333 hp @ 1800 rpm |
| Box Height | 3 5/8 in |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Output Torque | 151 lb-in |
| Input HP @ RPM | 0.081 hp @ 1150 rpm, 0.17 hp @ 1750 rpm |
| Base | No |
| Center Distance | 1 in |
| Output Torque @ RPM | 129 in lb @ 1150 rpm, 151 in lb @ 1750 rpm |
| Reduction Type | Single |
| Motor Application | General Purpose |
| Motor Frame Size | B442CZ |
| Fan Cooled | No |
| Frame Size | 42CZ |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Style | Right Angle |
| Output Configuration | Left & Right Output |
| Keyway Size | 1/8 x 1/16 |
| Output (Shaft or Bore) Size | 1/2 in |
| Shaft Assembly Code | H |
| Media Mapping Output | H |
| Max. Input HP @ 100 rpm | 0.011 hp |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Input (Shaft or Bore) Size | 1/2 in |
| Base to Centerline of Output Shaft | 1.31 in |
| Family Name | F |
| Torque Out @ 1750 rpm | 151 in lb |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Lubrication | None |
| Frame | 42CZ |
| Motor HP | 0.1667 hp |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Weight | 10.1 LB |
| EAN or UPC | 781711518656 |
