Find a Service Center
Boston Gear
F710-40-B5-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101796319
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Series | 700 |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Frame Size | 56C |
| Output Shaft Projection | Solid Double Projecting Output |
| Input (Shaft or Bore) Size | 5/8 in |
| Fan Cooled | No |
| Input HP @ RPM | 0.081 hp @ 1150 rpm, 0.17 hp @ 1750 rpm |
| Bore Code | B5 |
| Style | Right Angle |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Shaft Assembly Code | H |
| Bolt Center | 2 5/8" x 1 11/16" |
| Media Mapping Output | H |
| Ratio | 40:1 |
| Use With | 710 |
| Max. Input HP @ 100 rpm | 0.011 hp |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Center Distance | 1 in |
| Lubrication | None |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Output Torque @ RPM | 129 in lb @ 1150 rpm, 151 in lb @ 1750 rpm |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Torque Out @ 1750 rpm | 151 in lb |
| Keyway Size | 3/16 x 3/32 |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Output (Shaft or Bore) Size | 1/2 in |
| Base Mounting Attachment | No Base |
| Base | No |
| Frame | 56C |
| Torque Out @ 1150 rpm | 129 in lb |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.08333333 hp @ 1800 rpm |
| Family Name | F |
| Motor Frame Size | B556C |
| Output Shaft | Solid |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Box Width | 3 11/32 in |
| Housing Material | Cast Iron |
| Output Configuration | Left & Right Output |
| Input Motor HP | 0.17 |
| Worm Position | Universal |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Material | Cast Iron, Standard Paint |
| Reduction Type | Single |
| Input Power Rating | 0.17 hp, 0.127 kW |
| Media Mapping Style | F |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Standard | AGMA Service Class I |
| Motor Application | General Purpose |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Input Configuration | C-Face Quilled |
| Output Torque | 151 lb-in |
| Center Distance Code | 710 |
| Output Bore Shaft Dia. | 0.5 in |
| Box Height | 3 5/8 in |
| Motor HP | 0.1667 hp |
| Output Speed | 43.8 rpm |
| Box Length | 4 1/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Base to Centerline of Output Shaft | 1.31 in |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Washdown Duty | No |
| Rated Efficiency | 62% |
| Weight | 10.1 LB |
| EAN or UPC | 781711598436 |
