Find a Service Center
Boston Gear
F710-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101795347
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Metal bowl guards are recommended for all applications
- To clean polycarbonate bowls, use mild soap and water only
- do not use cleansing agents such as acetone, benzene, carbon tetrachloride, gasoline, toluene, etc., which damage this plastic
| Media Mapping Output | J |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Center Distance Code | 710 |
| Input Configuration | C-Face Quilled |
| Style | Right Angle |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Series | 700 |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Rated Efficiency | 62% |
| Motor Application | General Purpose |
| Reduction Type | Single |
| Torque Out @ 1750 rpm | 151 in lb |
| Standard | AGMA Service Class I |
| Max. Input HP @ 100 rpm | 0.011 hp |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.08333333 hp @ 1800 rpm |
| Bore Code | B5 |
| Torque Out @ 1150 rpm | 129 in lb |
| Input Motor HP | 0.17 |
| Output Shaft | Solid |
| Frame | 56C |
| Worm Position | Universal |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Output (Shaft or Bore) Size | 1/2 in |
| Keyway Size | 3/16 x 3/32 |
| Input HP @ RPM | 0.081 hp @ 1150 rpm, 0.17 hp @ 1750 rpm |
| Washdown Duty | No |
| Output Configuration | Right Output |
| Box Width | 3 11/32 in |
| Motor HP | 0.1667 hp |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Bore Shaft Dia. | 0.5 in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Use With | 710 |
| Output Speed | 43.8 rpm |
| Fan Cooled | No |
| Family Name | F |
| Lubrication | None |
| Bolt Center | 2 5/8" x 1 11/16" |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Box Length | 4 1/4 in |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Media Mapping Style | F |
| Frame Size | 56C |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Box Height | 3 5/8 in |
| Base to Centerline of Output Shaft | 1.31 in |
| Motor Frame Size | B556C |
| Material | Cast Iron, Standard Paint |
| Shaft Assembly Code | J |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Output Torque @ RPM | 129 in lb @ 1150 rpm, 151 in lb @ 1750 rpm |
| Center Distance | 1 in |
| Output Shaft Projection | Solid Right Output |
| Ratio | 40:1 |
| Base | No |
| Housing Material | Cast Iron |
| Output Torque | 151 lb-in |
| Input Power Rating | 0.17 hp, 0.127 kW |
| Weight | 10.1 LB |
| EAN or UPC | 781711598443 |
