Find a Service Center
Boston Gear
F710-5-B5-J
700 Series 5:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835180
- 0.5 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Worm Position | Universal |
| Media Mapping Style | F |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Bolt Center | 2 5/8" x 1 11/16" |
| Input (Shaft or Bore) Size | 5/8 in |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Box Width | 3 11/32 in |
| Box Height | 3 5/8 in |
| Input Power Rating | 0.69 hp, 0.515 kW |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft | Solid |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Material | Cast Iron, Standard Paint |
| Base Mounting Attachment | No Base |
| Reduction Type | Single |
| Torque Out @ 1150 rpm | 98 in lb |
| Rated Efficiency | 91% |
| Frame | 56C |
| Media Mapping Output | J |
| Output Shaft Projection | Solid Right Output |
| Standard | AGMA Service Class II |
| Lubrication | None |
| Box Length | 4 1/4 in |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output Configuration | Right Output |
| Use With | 710 |
| Ratio | 5:1 |
| Motor Frame Size | B556C |
| Motor Application | General Purpose |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Output Speed | 350 rpm |
| Shaft Assembly Code | J |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Fan Cooled | No |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Output Torque @ RPM | 98 in lb @ 1150 rpm, 113 in lb @ 1750 rpm |
| Series | 700 |
| Torque Out @ 1750 rpm | 113 in lb |
| Base to Centerline of Output Shaft | 1.31 in |
| Washdown Duty | No |
| Housing Material | Cast Iron |
| Center Distance Code | 710 |
| Bore Code | B5 |
| Output Torque | 113 lb-in |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Base | No |
| Frame Size | 56C |
| Style | Right Angle |
| Input HP @ RPM | 0.4 hp @ 1150 rpm, 0.69 hp @ 1750 rpm |
| Output Bore Shaft Dia. | 0.5 in |
| Family Name | F |
| Input Configuration | C-Face Quilled |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Input Motor HP | 0.50 |
| Center Distance | 1 in |
| Output (Shaft or Bore) Size | 1/2 in |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Weight | 10.1 LB |
| EAN or UPC | 781711598283 |
