Find a Service Center
Boston Gear
F710-50-B4-H
700 Series 50:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809003
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Length | 4 1/4 in |
| Max. Input HP @ 100 rpm | 0.008 hp |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Output Torque | 153 lb-in |
| Frame Size | 42CZ |
| Frame | 42CZ |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Media Mapping Output | H |
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Box Height | 3 5/8 in |
| Bore Code | B4 |
| Motor HP | 0.1667 hp |
| Box Width | 3 11/32 in |
| Washdown Duty | No |
| HP @ RPM | 0.08333333 hp @ 1800 rpm |
| Rated Efficiency | 57% |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Motor Application | General Purpose |
| Torque Out @ 1750 rpm | 153 in lb |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Motor Frame Size | B442CZ |
| Input Configuration | C-Face Quilled |
| Input (Shaft or Bore) Size | 1/2 in |
| Output Shaft | Solid |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Keyway Size | 1/8 x 1/16 |
| Media Mapping Style | F |
| Output Shaft Projection | Solid Double Projecting Output |
| Torque Out @ 1150 rpm | 114 in lb |
| Material | Cast Iron, Standard Paint |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Center Distance | 1 in |
| Base | No |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Output Bore Shaft Dia. | 0.5 in |
| Base Mounting Attachment | No Base |
| Fan Cooled | No |
| Reduction Type | Single |
| Use With | 710 |
| Ratio | 50:1 |
| Style | Right Angle |
| Output (Shaft or Bore) Size | 1/2 in |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Input Power Rating | 0.15 hp, 0.112 kW |
| Output Speed | 35 rpm |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Center Distance Code | 710 |
| Series | 700 |
| Input HP @ RPM | 0.06 hp @ 1150 rpm, 0.15 hp @ 1750 rpm |
| Output Torque @ RPM | 114 in lb @ 1150 rpm, 153 in lb @ 1750 rpm |
| Shaft Assembly Code | H |
| Output Configuration | Left & Right Output |
| Input Motor HP | 0.17 |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Weight | 10.1 LB |
| EAN or UPC | 781711518687 |
