Find a Service Center
Boston Gear
F710-50-B4-J
700 Series 50:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809814
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Power Rating | 0.15 hp, 0.112 kW |
| Washdown Duty | No |
| Output Speed | 35 rpm |
| Input HP @ RPM | 0.06 hp @ 1150 rpm, 0.15 hp @ 1750 rpm |
| Torque Out @ 1750 rpm | 153 in lb |
| Use With | 710 |
| Input Configuration | C-Face Quilled |
| Fan Cooled | No |
| Input Motor HP | 0.17 |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Media Mapping Output | J |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Torque Out @ 1150 rpm | 114 in lb |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output Torque @ RPM | 114 in lb @ 1150 rpm, 153 in lb @ 1750 rpm |
| Reduction Type | Single |
| Worm Position | Universal |
| Frame | 42CZ |
| HP @ RPM | 0.08333333 hp @ 1800 rpm |
| Base to Centerline of Output Shaft | 1.31 in |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Motor HP | 0.1667 hp |
| Material | Cast Iron, Standard Paint |
| Style | Right Angle |
| Series | 700 |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Output (Shaft or Bore) Size | 1/2 in |
| Base Mounting Attachment | No Base |
| Max. Input HP @ 100 rpm | 0.008 hp |
| Box Height | 3 5/8 in |
| Output Bore Shaft Dia. | 0.5 in |
| Media Mapping Style | F |
| Center Distance | 1 in |
| Motor Frame Size | B442CZ |
| Center Distance Code | 710 |
| Family Name | F |
| Lubrication | None |
| Bore Code | B4 |
| Keyway Size | 1/8 x 1/16 |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Bolt Center | 2 5/8" x 1 11/16" |
| Input (Shaft or Bore) Size | 1/2 in |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Output Torque | 153 lb-in |
| Box Length | 4 1/4 in |
| Standard | AGMA Service Class I |
| Output Shaft Projection | Solid Right Output |
| Base | No |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Ratio | 50:1 |
| Motor Application | General Purpose |
| Box Width | 3 11/32 in |
| Shaft Assembly Code | J |
| Output Configuration | Right Output |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Output Shaft | Solid |
| Frame Size | 42CZ |
| Housing Material | Cast Iron |
| Rated Efficiency | 57% |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Weight | 10.1 LB |
| EAN or UPC | 781711518694 |
