Find a Service Center
Boston Gear
F710-50-B5-G
700 Series 50:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #102207005
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Do not run Worm Gear units over 200 °F.
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Box Width | 3 11/32 in |
| Standard | AGMA Service Class I |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Torque Out @ 1750 rpm | 153 in lb |
| HP @ RPM | 0.08333333 hp @ 1800 rpm |
| Lubrication | None |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Housing Material | Cast Iron |
| Output Shaft | Solid |
| Style | Right Angle |
| Material | Cast Iron, Standard Paint |
| Base to Centerline of Output Shaft | 1.31 in |
| Use With | 710 |
| Washdown Duty | No |
| Media Mapping Output | G |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Output Torque @ RPM | 114 in lb @ 1150 rpm, 153 in lb @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Fan Cooled | No |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Worm Position | Universal |
| Center Distance | 1 in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Torque Out @ 1150 rpm | 114 in lb |
| Ratio | 50:1 |
| Output Configuration | Left Output |
| Media Mapping Style | F |
| Base Mounting Attachment | No Base |
| Output Shaft Projection | Solid Left Output |
| Input Power Rating | 0.15 hp, 0.112 kW |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Bore Code | B5 |
| Input (Shaft or Bore) Size | 5/8 in |
| Input Motor HP | 0.17 |
| Shaft Assembly Code | G |
| Frame | 56C |
| Input HP @ RPM | 0.06 hp @ 1150 rpm, 0.15 hp @ 1750 rpm |
| Rated Efficiency | 57% |
| Output (Shaft or Bore) Size | 1/2 in |
| Reduction Type | Single |
| Motor Application | General Purpose |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Bolt Center | 2 5/8" x 1 11/16" |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Box Height | 3 5/8 in |
| Input Configuration | C-Face Quilled |
| Series | 700 |
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Family Name | F |
| Output Torque | 153 lb-in |
| Output Speed | 35 rpm |
| Base | No |
| Output Bore Shaft Dia. | 0.5 in |
| Frame Size | 56C |
| Center Distance Code | 710 |
| Box Length | 4 1/4 in |
| Motor Frame Size | B556C |
| Weight | 10.1 LB |
| EAN or UPC | 781711598450 |
