Find a Service Center
Boston Gear
F713-10-B5-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835990
- 0.75 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Bore Code | B5 |
| Motor Application | General Purpose |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Media Mapping Style | F |
| Output Configuration | Left & Right Output |
| Style | Right Angle |
| Motor HP | 3/4 hp |
| Series | 700 |
| Fan Cooled | No |
| Motor Frame Size | B556C |
| Media Mapping Output | H |
| Input Configuration | C-Face Quilled |
| Standard | AGMA Service Class I |
| Torque Out @ 1750 rpm | 281 in lb |
| Center Distance | 1.33 in |
| Frame | 56C |
| Center Distance Code | 713 |
| Input (Shaft or Bore) Size | 5/8 in |
| Worm Position | Universal |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Max. Input HP @ 100 rpm | 0.06 hp |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Output Bore Shaft Dia. | 0.625 in |
| Frame Size | 56C |
| Output Torque @ RPM | 243 in lb @ 1150 rpm, 281 in lb @ 1750 rpm |
| Washdown Duty | No |
| Material | Cast Iron, Standard Paint |
| Ratio | 10:1 |
| Input Power Rating | 0.86 hp, 0.641 kW |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Box Width | 4.03 in |
| Use With | 713 |
| Bolt Center | 3 1/4" x 2" |
| Shaft Assembly Code | H |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Input HP @ RPM | 0.51 hp @ 1150 rpm, 0.86 hp @ 1750 rpm |
| Torque Out @ 1150 rpm | 243 in lb |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Box Length | 4 1/4 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Reduction Type | Single |
| Output Torque | 281 lb-in |
| Output Shaft Projection | Solid Double Projecting Output |
| Base | No |
| Input Motor HP | 0.75 |
| Output Speed | 175 rpm |
| Lubrication | None |
| Rated Efficiency | 91% |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Output (Shaft or Bore) Size | 5/8 in |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Base Mounting Attachment | No Base |
| Base to Centerline of Output Shaft | 1.72 in |
| Housing Material | Cast Iron |
| Box Height | 4 21/32 in |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output Shaft | Solid |
| Family Name | F |
| Weight | 13.1 LB |
| EAN or UPC | 781711518748 |
