Find a Service Center
Boston Gear
F713-25-B5-H
700 Series 25:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870627
- 0.33 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Center Distance Code | 713 |
| Series | 700 |
| Input Power Rating | 0.43 hp, 0.321 kW |
| Bore Code | B5 |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Keyway Size | 3/16 x 3/32 |
| Output (Shaft or Bore) Size | 5/8 in |
| Shaft Assembly Code | H |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Base to Centerline of Output Shaft | 1.72 in |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Reduction Type | Single |
| Base | No |
| Box Height | 4 21/32 in |
| Media Mapping Style | F |
| Max. Input HP @ 100 rpm | 0.031 hp |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Motor Application | General Purpose |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Fan Cooled | No |
| Output Torque @ RPM | 260 in lb @ 1150 rpm, 307 in lb @ 1750 rpm |
| Worm Position | Universal |
| Output Shaft Projection | Solid Double Projecting Output |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Torque Out @ 1750 rpm | 307 in lb |
| Output Torque | 307 lb-in |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Output Speed | 70 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Input Configuration | C-Face Quilled |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Torque Out @ 1150 rpm | 260 in lb |
| Output Bore Shaft Dia. | 0.625 in |
| Frame | 56C |
| Output Shaft | Solid |
| Bolt Center | 3 1/4" x 2" |
| Motor Frame Size | B556C |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Motor HP | 0.33 hp |
| Rated Efficiency | 79% |
| Use With | 713 |
| Material | Cast Iron, Standard Paint |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Ratio | 25:1 |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Input Motor HP | 0.33 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Length | 4 1/4 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Standard | AGMA Service Class II |
| Washdown Duty | No |
| Media Mapping Output | H |
| Frame Size | 56C |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Family Name | F |
| Housing Material | Cast Iron |
| Input (Shaft or Bore) Size | 5/8 in |
| Lubrication | None |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Box Width | 4.03 in |
| Center Distance | 1.33 in |
| Style | Right Angle |
| Output Configuration | Left & Right Output |
| Weight | 13.1 LB |
| EAN or UPC | 781711518830 |
