Boston Gear
F713-50-B5-H
700 Series 50:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101837667
- 0.25 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.1666667 hp @ 1800 rpm |
| Frame Size | 56C |
| Ratio | 50:1 |
| Bore Code | B5 |
| Keyway Size | 3/16 x 3/32 |
| Media Mapping Output | H |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Input Motor HP | 0.25 |
| Box Length | 4 1/4 in |
| Reduction Type | Single |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Input Configuration | C-Face Quilled |
| Base to Centerline of Output Shaft | 1.72 in |
| Output Shaft | Solid |
| Torque Out @ 1750 rpm | 297 in lb |
| Style | Right Angle |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Lubrication | None |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output Configuration | Left & Right Output |
| Bolt Center | 3 1/4" x 2" |
| Output Speed | 35 rpm |
| Motor Application | General Purpose |
| Output Bore Shaft Dia. | 0.625 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Standard | AGMA Service Class I |
| Family Name | F |
| Output Torque | 297 lb-in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Material | Cast Iron, Standard Paint |
| Output Torque @ RPM | 248 in lb @ 1150 rpm, 297 in lb @ 1750 rpm |
| Input HP @ RPM | 0.12 hp @ 1150 rpm, 0.25 hp @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Center Distance | 1.33 in |
| Worm Position | Universal |
| Input Power Rating | 0.25 hp, 0.186 kW |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Rated Efficiency | 66% |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Input (Shaft or Bore) Size | 5/8 in |
| Base | No |
| Box Width | 4.03 in |
| Output (Shaft or Bore) Size | 5/8 in |
| Media Mapping Style | F |
| Frame | 56C |
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Motor HP | 0.1667 hp |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Motor Frame Size | B556C |
| Max. Input HP @ 100 rpm | 0.018 hp |
| Box Height | 4 21/32 in |
| Housing Material | Cast Iron |
| Output Shaft Projection | Solid Double Projecting Output |
| Washdown Duty | No |
| Fan Cooled | No |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Use With | 713 |
| Torque Out @ 1150 rpm | 248 in lb |
| Base Mounting Attachment | No Base |
| Shaft Assembly Code | H |
| Center Distance Code | 713 |
| Series | 700 |
| Weight | 13.1 LB |
| EAN or UPC | 781711518922 |
