Find a Service Center
Boston Gear
F715-15-B5-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809375
- 0.75 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Center Distance Code | 715 |
| Torque Out @ 1150 rpm | 376 in lb |
| Motor Application | General Purpose |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Torque Out @ 1750 rpm | 428 in lb |
| Shaft Assembly Code | H |
| Box Height | 5 3/8 in |
| Output (Shaft or Bore) Size | 3/4 in |
| HP @ RPM | 0.5 hp @ 1800 rpm |
| Standard | AGMA Service Class I |
| Center Distance | 1.54 in |
| Housing Material | Cast Iron |
| Output Speed | 116.7 rpm |
| Output Bore Shaft Dia. | 0.75 in |
| Lubrication | None |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Base Mounting Attachment | No Base |
| Frame Size | 56C |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Input Power Rating | 0.91 hp, 0.679 kW |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Media Mapping Output | H |
| Series | 700 |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Worm Position | Universal |
| Washdown Duty | No |
| Frame | 56C |
| Max. Input HP @ 100 rpm | 0.07 hp |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Base to Centerline of Output Shaft | 1.91 in |
| Box Length | 5 1/8 in |
| Keyway Size | 3/16 x 3/32 |
| Input HP @ RPM | 0.53 hp @ 1150 rpm, 0.91 hp @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Output Shaft Projection | Solid Double Projecting Output |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Rated Efficiency | 87% |
| Fan Cooled | No |
| Ratio | 15:1 |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Output Torque @ RPM | 376 in lb @ 1150 rpm, 428 in lb @ 1750 rpm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Motor HP | 3/4 hp |
| Family Name | F |
| Output Configuration | Left & Right Output |
| Output Torque | 429 lb-in |
| Reduction Type | Single |
| Style | Right Angle |
| Input Motor HP | 0.75 |
| Bore Code | B5 |
| Media Mapping Style | F |
| Box Width | 5 1/16 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Base | No |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Output Shaft | Solid |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Material | Cast Iron, Standard Paint |
| Use With | 715 |
| Motor Frame Size | B556C |
| Weight | 17.1 LB |
| EAN or UPC | 781711519042 |
