Find a Service Center
Boston Gear
F715-25-B5-G
700 Series 25:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835849
- 0.5 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Rated Efficiency | 81% |
| Material | Cast Iron, Standard Paint |
| Series | 700 |
| Use With | 715 |
| Input Motor HP | 0.50 |
| Input (Shaft or Bore) Size | 5/8 in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Lubrication | None |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Media Mapping Style | F |
| Frame | 56C |
| Box Length | 5 1/8 in |
| Ratio | 25:1 |
| Bore Code | B5 |
| Center Distance | 1.54 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Torque Out @ 1150 rpm | 375 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Base Mounting Attachment | No Base |
| Output Shaft | Solid |
| Output Torque | 437 lb-in |
| Max. Input HP @ 100 rpm | 0.043 hp |
| Washdown Duty | No |
| Reduction Type | Single |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Center Distance Code | 715 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Standard | AGMA Service Class I |
| Fan Cooled | No |
| Media Mapping Output | G |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Box Width | 5 1/16 in |
| Motor Application | General Purpose |
| Worm Position | Universal |
| Input Power Rating | 0.6 hp, 0.447 kW |
| Output Configuration | Left Output |
| Output Torque @ RPM | 375 in lb @ 1150 rpm, 437 in lb @ 1750 rpm |
| Output (Shaft or Bore) Size | 3/4 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Torque Out @ 1750 rpm | 437 in lb |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Output Shaft Projection | Solid Left Output |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Motor HP | 1/2 hp |
| Input HP @ RPM | 0.35 hp @ 1150 rpm, 0.6 hp @ 1750 rpm |
| Family Name | F |
| Shaft Assembly Code | G |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Box Height | 5 3/8 in |
| Style | Right Angle |
| Motor Frame Size | B556C |
| Output Bore Shaft Dia. | 0.75 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Input Configuration | C-Face Quilled |
| Output Speed | 70 rpm |
| Housing Material | Cast Iron |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Base | No |
| Frame Size | 56C |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Base to Centerline of Output Shaft | 1.91 in |
| Weight | 17.1 LB |
| EAN or UPC | 781711519097 |
