Find a Service Center
Boston Gear
F715-5-B5-H
700 Series 5:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835121
- 1.50 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Family Name | F |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Output Configuration | Left & Right Output |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Shaft Assembly Code | H |
| Input (Shaft or Bore) Size | 5/8 in |
| Style | Right Angle |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Torque Out @ 1150 rpm | 285 in lb |
| Media Mapping Output | H |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Use With | 715 |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Bore Code | B5 |
| Housing Material | Cast Iron |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Base | No |
| Input Motor HP | 1.50 |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Bore Shaft Dia. | 0.75 in |
| Ratio | 5:1 |
| Torque Out @ 1750 rpm | 291 in lb |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Center Distance | 1.54 in |
| Motor Application | General Purpose |
| Motor Frame Size | B556C |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Output Torque | 291 lb-in |
| Fan Cooled | No |
| Output Speed | 350 rpm |
| Box Length | 5 1/8 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Rated Efficiency | 94% |
| Frame | 56C |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output (Shaft or Bore) Size | 3/4 in |
| Output Shaft | Solid |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Base to Centerline of Output Shaft | 1.91 in |
| Input Power Rating | 1.72 hp, 1.283 kW |
| Worm Position | Universal |
| Lubrication | None |
| Input Configuration | C-Face Quilled |
| Material | Cast Iron, Standard Paint |
| Box Width | 5 1/16 in |
| Reduction Type | Single |
| Motor HP | 1 hp |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Series | 700 |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Washdown Duty | No |
| Media Mapping Style | F |
| Center Distance Code | 715 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Input HP @ RPM | 1.15 hp @ 1150 rpm, 1.72 hp @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Frame Size | 56C |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Output Torque @ RPM | 285 in lb @ 1150 rpm, 291 in lb @ 1750 rpm |
| Box Height | 5 3/8 in |
| Keyway Size | 3/16 x 3/32 |
| Weight | 17.1 LB |
| EAN or UPC | 781711518953 |
