Find a Service Center
Boston Gear
F718-10-B7-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870734
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Motor HP | 1 1/2 hp |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Output (Shaft or Bore) Size | 7/8 in |
| Output Bore Shaft Dia. | 0.875 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Shaft Assembly Code | H |
| Frame | 140TC, 180C |
| Motor Frame Size | B7140TC180C |
| Worm Position | Universal |
| Keyway Size | 3/16 x 3/32 |
| Media Mapping Output | H |
| Rated Efficiency | 92% |
| Input Configuration | C-Face Quilled |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Series | 700 |
| Base | No |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Bore Code | B7 |
| Use With | 718 |
| Housing Material | Cast Iron |
| Family Name | F |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Output Configuration | Left & Right Output |
| Output Shaft Projection | Solid Double Projecting Output |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Reduction Type | Single |
| Washdown Duty | No |
| Style | Right Angle |
| Input Motor HP | 1.50 |
| Lubrication | None |
| Fan Cooled | No |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Box Height | 5 3/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Length | 5 1/2 in |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Output Speed | 175 rpm |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Torque Out @ 1150 rpm | 480 in lb |
| Box Width | 5 1/32 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output Shaft | Solid |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Torque Out @ 1750 rpm | 536 in lb |
| Motor Application | General Purpose |
| Center Distance | 1.75 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output Torque | 536 lb-in |
| Media Mapping Style | F |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Base Mounting Attachment | No Base |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Standard | AGMA Service Class I |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Input (Shaft or Bore) Size | 7/8 in |
| Frame Size | 140TC, 180C |
| Center Distance Code | 718 |
| Material | Cast Iron, Standard Paint |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Ratio | 10:1 |
| Weight | 19.1 LB |
| EAN or UPC | 781711525807 |
