Find a Service Center
Boston Gear
F718-10-B7-J
700 Series 10:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101872189
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Motor HP | 1.5 hp |
| Output (Shaft or Bore) Size | 7/8 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Bore Code | B7 |
| Washdown Duty | No |
| Torque Out @ 1750 rpm | 536 in lb |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Family Name | F |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Box Width | 5 1/32 in |
| Reduction Type | Single |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Standard | AGMA Service Class I |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Frame | 140TC, 180C |
| Series | 700 |
| Motor Frame Size | B7140TC180C |
| Material | Cast Iron, Standard Paint |
| Input (Shaft or Bore) Size | 7/8 in |
| Output Torque | 536 lb-in |
| Output Bore Shaft Dia. | 0.875 in |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Media Mapping Output | J |
| Motor Application | General Purpose |
| Rated Efficiency | 92% |
| Box Height | 5 3/4 in |
| Use With | 718 |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Output Shaft Projection | Solid Right Output |
| HP @ RPM | 1 hp @ 1800 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Frame Size | 140TC, 180C |
| Lubrication | None |
| Output Configuration | Right Output |
| Housing Material | Cast Iron |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Center Distance | 1.75 in |
| Center Distance Code | 718 |
| Torque Out @ 1150 rpm | 480 in lb |
| Media Mapping Style | F |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Style | Right Angle |
| Box Length | 5 1/2 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Ratio | 10:1 |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Input Motor HP | 1.50 |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Input Configuration | C-Face Quilled |
| Output Shaft | Solid |
| Base Mounting Attachment | No Base |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Fan Cooled | No |
| Output Speed | 175 rpm |
| Base | No |
| Keyway Size | 3/16 x 3/32 |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Shaft Assembly Code | J |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Weight | 19.1 LB |
| EAN or UPC | 781711525821 |
