Boston Gear
F721-15-B7-J
700 Series 15:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870873
- 1.50 Input Motor hp
- 700 Series
- 2.06 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Speed | 116.7 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 6 3/8 x 4 11/16 |
| Base to Centerline of Input Shaft | 4 11/32 in |
| Use With | 721 |
| Box Length | 6 in |
| Torque Out @ 1750 rpm | 840 in lb |
| Input Motor HP | 1.50 |
| Frame Size | 140TC, 180C |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.94 in |
| Media Mapping Output | J |
| Bolt Center | 5 in x 2 7/8 in |
| Input Power Rating | 1.72 hp, 1.283 kW |
| Bore Code | B7 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.88 in |
| Center Distance Code | 721 |
| Frame | 140TC, 180C |
| Output Shaft | Solid |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Output Configuration | Right Output |
| Output Bore Shaft Dia. | 1 in |
| Shaft Assembly Code | J |
| Keyway Size | 3/16 x 3/32 |
| Bolt Centers w/ Vertical Base Kits (in) | 8 3/8 x 4 7/8 |
| Max. Thrust Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Torque Out @ 1150 rpm | 752 in lb |
| Output Torque Rating Range [Max] | 999 lb-in, 109 Nm |
| Box Height | 6 3/8 in |
| Output Shaft Projection | Solid Right Output |
| Input Configuration | C-Face Quilled |
| Output Torque | 841 lb-in |
| Ratio | 15:1 |
| Washdown Duty | No |
| Motor HP | 1 1/2 hp |
| Max. Input HP @ 100 rpm | 0.13 hp |
| Box Width | 5 3/16 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Output Torque Rating Range [Min] | 750 lb-in, 85 Nm |
| Base to Shaft Center Height w/Std. Base Kit | 4.81 in |
| Series | 700 |
| Motor Application | General Purpose |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 8.63 x 2.63 |
| Max. Overhung Load @ 1750 rpm | 700 lb/in |
| Base | No |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.13 in |
| Housing Material | Cast Iron |
| Max. Overhung Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Family Name | F |
| Standard | AGMA Service Class I |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Thrust Load @ 1150 rpm | 700 lb/in |
| Lubrication | None |
| Worm Position | Universal |
| Media Mapping Style | F |
| Fan Cooled | No |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Output Torque @ RPM | 752 in lb @ 1150 rpm, 840 in lb @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| HP @ RPM | 1 hp @ 1800 rpm |
| Center Distance | 2.0625 in |
| Output (Shaft or Bore) Size | 1 in |
| Style | Right Angle |
| Base to Centerline of Output Shaft | 2.28 in |
| Rated Efficiency | 90% |
| Reduction Type | Single |
| Input HP @ RPM | 1.06 hp @ 1150 rpm, 1.72 hp @ 1750 rpm |
| Motor Frame Size | B7140TC180C |
| Weight | 24.1 LB |
| EAN or UPC | 781711525869 |
