Boston Gear
F721-5-B7-J
700 Series 5:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101523860
- 2 Input Motor hp
- 700 Series
- 2.06 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Unlimited shelf life
- Specially refined aggregate provides an irregular surface profile
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.94 in |
| Input Configuration | C-Face Quilled |
| Center Distance | 2.0625 in |
| Output Shaft Projection | Solid Right Output |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.88 in |
| Housing Material | Cast Iron |
| Center Distance Code | 721 |
| Max. Input HP @ 100 rpm | 0.3 hp |
| Input Motor HP | 2 |
| Max. Overhung Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Family Name | F |
| Torque Out @ 1150 rpm | 575 in lb |
| Use With | 721 |
| Keyway Size | 3/16 x 3/32 |
| Washdown Duty | No |
| Box Width | 5 3/16 in |
| Output Bore Shaft Dia. | 1 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.81 in |
| Media Mapping Style | F |
| Input Power Rating | 3.66 hp, 2.729 kW |
| Style | Right Angle |
| Motor Application | General Purpose |
| HP @ RPM | 3 hp @ 1800 rpm |
| Frame Size | 140TC, 180C |
| Lubrication | None |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Base to Centerline of Input Shaft | 4 11/32 in |
| Material | Cast Iron, Standard Paint |
| Media Mapping Output | J |
| Torque Out @ 1750 rpm | 620 in lb |
| Shaft Assembly Code | J |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Series | 700 |
| Max. Overhung Load @ 1750 rpm | 700 lb/in |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Base | No |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.13 in |
| Frame | 140TC, 180C |
| Input HP @ RPM | 2.33 hp @ 1150 rpm, 3.66 hp @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 700 lb/in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Centers w/ Std. Base Kit (in) | 6 3/8 x 4 11/16 |
| Bolt Centers w/ Vertical Base Kits (in) | 8 3/8 x 4 7/8 |
| Motor Frame Size | B7140TC180C |
| Bore Code | B7 |
| Input (Shaft or Bore) Size | 7/8 in |
| Fan Cooled | No |
| Box Height | 6 3/8 in |
| Motor HP | 2 hp |
| Ratio | 5:1 |
| Worm Position | Universal |
| Standard | AGMA Service Class II |
| Output Speed | 350 rpm |
| Output Torque | 620 lb-in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 8.63 x 2.63 |
| Bolt Center | 5 in x 2 7/8 in |
| Reduction Type | Single |
| Max. Thrust Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Output (Shaft or Bore) Size | 1 in |
| Rated Efficiency | 94% |
| Base to Centerline of Output Shaft | 2.28 in |
| Output Configuration | Right Output |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Output Torque @ RPM | 575 in lb @ 1150 rpm, 620 in lb @ 1750 rpm |
| Box Length | 6 in |
| Weight | 24.1 LB |
| EAN or UPC | 781711519530 |
