Find a Service Center
Boston Gear
F724-10-B7-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809818
- 3 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bore Code | B7 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Output Shaft Projection | Solid Left Output |
| Output Speed | 175 rpm |
| Torque Out @ 1150 rpm | 1025 in lb |
| Output Bore Shaft Dia. | 1.125 in |
| Style | Right Angle |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Input (Shaft or Bore) Size | 7/8 in |
| Max. Input HP @ 100 rpm | 0.27 hp |
| Series | 700 |
| Reduction Type | Single |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Torque Out @ 1750 rpm | 1069 in lb |
| Motor HP | 2 hp |
| Frame | 140TC, 180C |
| Bolt Center | 5 in x 2 7/8 in |
| HP @ RPM | 3 hp @ 1800 rpm |
| Input Configuration | C-Face Quilled |
| Output Torque @ RPM | 1025 in lb @ 1150 rpm, 1069 in lb @ 1750 rpm |
| Housing Material | Cast Iron |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Standard | AGMA Service Class I |
| Box Height | 6 15/16 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Motor Frame Size | B7140TC180C |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Motor Application | General Purpose |
| Center Distance Code | 724 |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Use With | 724 |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Center Distance | 2.375 in |
| Output Configuration | Left Output |
| Box Width | 5 7/16 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input Motor HP | 3 |
| Input Power Rating | 3.18 hp, 2.371 kW |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Media Mapping Output | G |
| Lubrication | None |
| Input HP @ RPM | 2.09 hp @ 1150 rpm, 3.18 hp @ 1750 rpm |
| Output Torque | 1069 lb-in |
| Rated Efficiency | 93% |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Frame Size | 140TC, 180C |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Output Shaft | Solid |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Family Name | F |
| Box Length | 6 3/8 in |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Worm Position | Universal |
| Ratio | 10:1 |
| Fan Cooled | No |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Media Mapping Style | F |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Weight | 30.1 LB |
| EAN or UPC | 781711519844 |
