Find a Service Center
Boston Gear
F724-10-B7-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834960
- 3 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Box Length | 6 3/8 in |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Reduction Type | Single |
| HP @ RPM | 3 hp @ 1800 rpm |
| Bore Code | B7 |
| Family Name | F |
| Frame Size | 140TC, 180C |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Input Power Rating | 3.18 hp, 2.371 kW |
| Rated Efficiency | 93% |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Center Distance | 2.375 in |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Series | 700 |
| Output Configuration | Left & Right Output |
| Max. Input HP @ 100 rpm | 0.27 hp |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Use With | 724 |
| Output Shaft | Solid |
| Frame | 140TC, 180C |
| Motor Frame Size | B7140TC180C |
| Media Mapping Style | F |
| Torque Out @ 1750 rpm | 1069 in lb |
| Center Distance Code | 724 |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Ratio | 10:1 |
| Output Speed | 175 rpm |
| Lubrication | None |
| Torque Out @ 1150 rpm | 1025 in lb |
| Input Configuration | C-Face Quilled |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Fan Cooled | No |
| Box Height | 6 15/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Bolt Center | 5 in x 2 7/8 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Motor HP | 2 hp |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Box Width | 5 7/16 in |
| Standard | AGMA Service Class I |
| Motor Application | General Purpose |
| Input (Shaft or Bore) Size | 7/8 in |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft Projection | Solid Double Projecting Output |
| Input HP @ RPM | 2.09 hp @ 1150 rpm, 3.18 hp @ 1750 rpm |
| Input Motor HP | 3 |
| Output Torque @ RPM | 1025 in lb @ 1150 rpm, 1069 in lb @ 1750 rpm |
| Output Torque | 1069 lb-in |
| Media Mapping Output | H |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Washdown Duty | No |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Worm Position | Universal |
| Style | Right Angle |
| Material | Cast Iron, Standard Paint |
| Shaft Assembly Code | H |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Keyway Size | 3/16 x 3/32 |
| Output Bore Shaft Dia. | 1.125 in |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Housing Material | Cast Iron |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Weight | 30.1 LB |
| EAN or UPC | 781711519851 |
