Find a Service Center
Boston Gear
F724-15-B7-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807807
- 2 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Box Height | 6 15/16 in |
| Output Speed | 116.7 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Media Mapping Style | F |
| Family Name | F |
| Keyway Size | 3/16 x 3/32 |
| Output Configuration | Left & Right Output |
| Input Power Rating | 2.34 hp, 1.745 kW |
| Shaft Assembly Code | H |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.19 hp |
| Washdown Duty | No |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Style | Right Angle |
| Output Bore Shaft Dia. | 1.125 in |
| Housing Material | Cast Iron |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft Projection | Solid Double Projecting Output |
| Bore Code | B7 |
| Frame | 140TC, 180C |
| Rated Efficiency | 92% |
| Frame Size | 140TC, 180C |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Standard | AGMA Service Class I |
| Lubrication | None |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Reduction Type | Single |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Output Torque @ RPM | 1060 in lb @ 1150 rpm, 1159 in lb @ 1750 rpm |
| Media Mapping Output | H |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Ratio | 15:1 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Center Distance | 2.375 in |
| Input Configuration | C-Face Quilled |
| Output Shaft | Solid |
| Worm Position | Universal |
| Motor Application | General Purpose |
| Input HP @ RPM | 1.51 hp @ 1150 rpm, 2.34 hp @ 1750 rpm |
| Input Motor HP | 2 |
| Use With | 724 |
| Output Torque | 1159 lb-in |
| Center Distance Code | 724 |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Fan Cooled | No |
| Box Width | 5 7/16 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Torque Out @ 1750 rpm | 1159 in lb |
| Bolt Center | 5 in x 2 7/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Torque Out @ 1150 rpm | 1060 in lb |
| Material | Cast Iron, Standard Paint |
| Series | 700 |
| Base Mounting Attachment | No Base |
| Motor HP | 2 hp |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Input (Shaft or Bore) Size | 7/8 in |
| Box Length | 6 3/8 in |
| Motor Frame Size | B7140TC180C |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Weight | 30.1 LB |
| EAN or UPC | 781711519912 |
