Find a Service Center
Boston Gear
F724-30-B5-H
700 Series 30:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805907
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Use of external guides or supports is strongly recommended for overhead mounting.
| Output Configuration | Left & Right Output |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Input Motor HP | 1 |
| Output Torque @ RPM | 1170 in lb @ 1150 rpm, 1200 in lb @ 1750 rpm |
| Box Height | 6 15/16 in |
| Motor Frame Size | B556C |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Bolt Center | 5 in x 2 7/8 in |
| Box Width | 5 7/16 in |
| Output Torque | 1200 lb-in |
| Output Speed | 58.3 rpm |
| Motor HP | 1 hp |
| Output Shaft | Solid |
| Frame | 56C |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Input Configuration | C-Face Quilled |
| Output Bore Shaft Dia. | 1.125 in |
| Worm Position | Universal |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Reduction Type | Single |
| Input (Shaft or Bore) Size | 5/8 in |
| Use With | 724 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Family Name | F |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Base to Centerline of Output Shaft | 2.5 in |
| Washdown Duty | No |
| Standard | AGMA Service Class II |
| Input HP @ RPM | 0.89 hp @ 1150 rpm, 1.33 hp @ 1750 rpm |
| Housing Material | Cast Iron |
| HP @ RPM | 1 hp @ 1800 rpm |
| Lubrication | None |
| Ratio | 30:1 |
| Torque Out @ 1150 rpm | 1170 in lb |
| Series | 700 |
| Base Mounting Attachment | No Base |
| Shaft Assembly Code | H |
| Input Power Rating | 1.33 hp, 0.992 kW |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Media Mapping Style | F |
| Center Distance | 2.375 in |
| Box Length | 6 3/8 in |
| Center Distance Code | 724 |
| Torque Out @ 1750 rpm | 1200 in lb |
| Base to Centerline of Input Shaft | 4.875 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Fan Cooled | No |
| Motor Application | General Purpose |
| Material | Cast Iron, Standard Paint |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Keyway Size | 3/16 x 3/32 |
| Frame Size | 56C |
| Style | Right Angle |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Media Mapping Output | H |
| Rated Efficiency | 83% |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bore Code | B5 |
| Weight | 30.1 LB |
| EAN or UPC | 781711520031 |
