Boston Gear
F724-40-B5-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835797
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Not intended to be operated with each other, with internal gears, or with 11-tooth spur gears
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Housing Material | Cast Iron |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Output Bore Shaft Dia. | 1.125 in |
| Standard | AGMA Service Class I |
| Fan Cooled | No |
| Center Distance Code | 724 |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Motor Application | General Purpose |
| Shaft Assembly Code | H |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Reduction Type | Single |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Style | Right Angle |
| Input Configuration | C-Face Quilled |
| Output Speed | 43.8 rpm |
| Torque Out @ 1750 rpm | 1206 in lb |
| Family Name | F |
| Input Power Rating | 1.08 hp, 0.805 kW |
| Motor HP | 3/4 hp |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Output Configuration | Left & Right Output |
| Ratio | 40:1 |
| Material | Cast Iron, Standard Paint |
| Box Length | 6 3/8 in |
| Bolt Center | 5 in x 2 7/8 in |
| Motor Frame Size | B556C |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Input HP @ RPM | 0.7 hp @ 1150 rpm, 1.08 hp @ 1750 rpm |
| Input Motor HP | 1 |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Base Mounting Attachment | No Base |
| Rated Efficiency | 77% |
| Frame Size | 56C |
| Center Distance | 2.375 in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Output Torque | 1206 lb-in |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Lubrication | None |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Box Height | 6 15/16 in |
| Torque Out @ 1150 rpm | 1160 in lb |
| Media Mapping Style | F |
| Media Mapping Output | H |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Bore Code | B5 |
| Frame | 56C |
| Worm Position | Universal |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Box Width | 5 7/16 in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Washdown Duty | No |
| Output Shaft | Solid |
| Series | 700 |
| Use With | 724 |
| Output Torque @ RPM | 1160 in lb @ 1150 rpm, 1206 in lb @ 1750 rpm |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Max. Input HP @ 100 rpm | 0.11 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Keyway Size | 3/16 x 3/32 |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Weight | 30.1 LB |
| EAN or UPC | 781711520062 |
