Find a Service Center
Boston Gear
F724-5-B9-H
700 Series 5:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807806
- 5 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Motor HP | 3 hp |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Input Motor HP | 5 |
| Output Configuration | Left & Right Output |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Bolt Center | 5 in x 2 7/8 in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| HP @ RPM | 3 hp @ 1800 rpm |
| Box Height | 6 15/16 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input Power Rating | 4.95 hp, 3.691 kW |
| Series | 700 |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Fan Cooled | No |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Frame Size | 180TC, 210C |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Torque Out @ 1150 rpm | 750 in lb |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Output Torque Rating Range [Min] | 750 lb-in, 85 Nm |
| Washdown Duty | No |
| Output Speed | 350 rpm |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Material | Cast Iron, Standard Paint |
| Family Name | F |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Ratio | 5:1 |
| Output Bore Shaft Dia. | 1.125 in |
| Worm Position | Universal |
| Box Width | 5 7/16 in |
| Input Configuration | C-Face Quilled |
| Media Mapping Style | F |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Torque Rating Range [Max] | 999 lb-in, 109 Nm |
| Box Length | 6 3/8 in |
| Center Distance Code | 724 |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Torque Out @ 1750 rpm | 838 in lb |
| Shaft Assembly Code | H |
| Frame | 180TC, 210C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Center Distance | 2.375 in |
| Rated Efficiency | 94% |
| Reduction Type | Single |
| Output Shaft | Solid |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Housing Material | Cast Iron |
| Keyway Size | 1/4 x 1/8 |
| Motor Frame Size | B9180TC210C |
| Input HP @ RPM | 3.05 hp @ 1150 rpm, 4.94 hp @ 1750 rpm |
| Bore Code | B9 |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Style | Right Angle |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Max. Input HP @ 100 rpm | 0.43 hp |
| Standard | AGMA Service Class I |
| Use With | 724 |
| Output Torque | 838 lb-in |
| Base Mounting Attachment | No Base |
| Motor Application | General Purpose |
| Lubrication | None |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Media Mapping Output | H |
| Output Torque @ RPM | 750 in lb @ 1150 rpm, 838 in lb @ 1750 rpm |
| Weight | 30.1 LB |
| EAN or UPC | 781711519820 |
