Boston Gear
F726-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101350434
- 1 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Motor HP | 1 hp |
| Keyway Size | 3/16 x 3/32 |
| Input (Shaft or Bore) Size | 5/8 in |
| Torque Out @ 1150 rpm | 1500 in lb |
| Output Torque | 1512 lb-in |
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Bore Code | B5 |
| Style | Right Angle |
| Box Height | 8 in |
| Family Name | F |
| Use With | 726 |
| Washdown Duty | No |
| Frame | 56C |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Series | 700 |
| Center Distance | 2.625 in |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1750 rpm, 1000 lb/in @ 1150 rpm |
| Box Length | 7 3/8 in |
| Material | Cast Iron, Standard Paint |
| Center Distance Code | 726 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4 3/4 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1750 rpm, 900 lb/in @ 1150 rpm |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Frame Size | 56C |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Box Width | 5.9 in |
| Motor Application | General Purpose |
| Torque Out @ 1750 rpm | 1512 in lb |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Ratio | 40:1 |
| Motor Frame Size | B556C |
| Output Bore Shaft Dia. | 1.125 in |
| Output RPM @ 1750 rpm Input | 44 rpm |
| Bolt Center Length x Bolt Center Width | 6 3/8 in x 3 3/8 in |
| Shaft Assembly Code | J |
| Output Torque @ RPM | 1512 in lb @ 1750 rpm, 1500 in lb @ 1150 rpm |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Media Mapping Output | J |
| Input Configuration | C-Face Quilled |
| HP @ RPM | 1 hp @ 1800 rpm |
| Lubrication | None |
| Input HP @ RPM | 1.33 hp @ 1750 rpm, 0.89 hp @ 1150 rpm |
| Input Power Rating | 1.33 hp, 0.992 kW |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Rated Efficiency | 79% |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Output Shaft Projection | Solid Right Output |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Bolt Pattern | 6.38 x 3.38 |
| Housing Material | Cast Iron |
| Input Motor HP | 1 |
| Worm Position | Universal |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Standard | AGMA Service Class II |
| Reduction Type | Single |
| Media Mapping Style | F |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Output Speed | 43.8 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Base Mounting Attachment | No Base |
| Fan Cooled | No |
| Output Shaft | Solid |
| Output Configuration | Right Output |
| Weight | 41.1 LB |
| EAN or UPC | 781711520468 |
