Boston Gear
F726-5-B9-G
700 Series 5:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101856457
- 5 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque @ RPM | 1000 in lb @ 1150 rpm, 1034 in lb @ 1750 rpm |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Keyway Size | 1/4 x 1/8 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Input Configuration | C-Face Quilled |
| Max. Input HP @ 100 rpm | 0.58 hp |
| Output Bore Shaft Dia. | 1.125 in |
| Ratio | 5:1 |
| Output Torque | 1034 lb-in |
| Input HP @ RPM | 4.05 hp @ 1150 rpm, 6.11 hp @ 1750 rpm |
| Rated Efficiency | 94% |
| Standard | AGMA Service Class I |
| Bore Code | B9 |
| Frame | 180TC, 210C |
| Box Length | 7 3/8 in |
| Worm Position | Universal |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Box Width | 5.9 in |
| Motor HP | 5 hp |
| HP @ RPM | 5 hp @ 1800 rpm |
| Material | Cast Iron, Standard Paint |
| Media Mapping Output | G |
| Lubrication | None |
| Torque Out @ 1150 rpm | 1000 in lb |
| Media Mapping Style | F |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Output Shaft Projection | Solid Left Output |
| Reduction Type | Single |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Center Distance Code | 726 |
| Frame Size | 180TC, 210C |
| Style | Right Angle |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Torque Out @ 1750 rpm | 1034 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Series | 700 |
| Shaft Assembly Code | G |
| Base Mounting Attachment | No Base |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Use With | 726 |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Housing Material | Cast Iron |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Washdown Duty | No |
| Motor Application | General Purpose |
| Output Shaft | Solid |
| Fan Cooled | No |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Center Distance | 2.625 in |
| Input Motor HP | 5 |
| Box Height | 8 in |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Motor Frame Size | B9180TC210C |
| Input Power Rating | 6.11 hp, 4.556 kW |
| Family Name | F |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Output Speed | 350 rpm |
| Output Configuration | Left Output |
| Weight | 41.1 LB |
| EAN or UPC | 781711520147 |
