Boston Gear
F726-5-B9-J
700 Series 5:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809380
- 5 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Shaft | Solid |
| Keyway Size | 1/4 x 1/8 |
| Series | 700 |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Media Mapping Style | F |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Torque Out @ 1150 rpm | 1000 in lb |
| Max. Input HP @ 100 rpm | 0.58 hp |
| Box Width | 5.9 in |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Input Configuration | C-Face Quilled |
| Lubrication | None |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Use With | 726 |
| Washdown Duty | No |
| Input HP @ RPM | 4.05 hp @ 1150 rpm, 6.11 hp @ 1750 rpm |
| Output Bore Shaft Dia. | 1.125 in |
| Input Motor HP | 5 |
| Motor Frame Size | B9180TC210C |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Media Mapping Output | J |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| HP @ RPM | 5 hp @ 1800 rpm |
| Base Mounting Attachment | No Base |
| Input Power Rating | 6.11 hp, 4.556 kW |
| Output Speed | 350 rpm |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output Shaft Projection | Solid Right Output |
| Rated Efficiency | 94% |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Family Name | F |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Output Torque | 1034 lb-in |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Frame Size | 180TC, 210C |
| Standard | AGMA Service Class I |
| Housing Material | Cast Iron |
| Worm Position | Universal |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Reduction Type | Single |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Output Torque @ RPM | 1000 in lb @ 1150 rpm, 1034 in lb @ 1750 rpm |
| Shaft Assembly Code | J |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Motor Application | General Purpose |
| Fan Cooled | No |
| Motor HP | 5 hp |
| Box Height | 8 in |
| Frame | 180TC, 210C |
| Output Configuration | Right Output |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Style | Right Angle |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Material | Cast Iron, Standard Paint |
| Ratio | 5:1 |
| Box Length | 7 3/8 in |
| Bore Code | B9 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Center Distance Code | 726 |
| Torque Out @ 1750 rpm | 1034 in lb |
| Center Distance | 2.625 in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520161 |
