Boston Gear
F730-20-B9-G
700 Series 20:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101794826
- 3 Input Motor hp
- 700 Series
- 3 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.
| Series | 700 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Worm Position | Universal |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Output Shaft Projection | Solid Left Output |
| Input Configuration | C-Face Quilled |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Torque Out @ 1750 rpm | 2024 in lb |
| Ratio | 20:1 |
| Rated Efficiency | 89% |
| Standard | AGMA Service Class I |
| Output Speed | 87.5 rpm |
| Output Shaft | Solid |
| Housing Material | Cast Iron |
| Input Motor HP | 3 |
| Output Bore Shaft Dia. | 1.25 in |
| Motor Application | General Purpose |
| Frame | 180TC, 210C |
| Box Length | 8 1/8 in |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Frame Size | 180TC, 210C |
| Family Name | F |
| Output Configuration | Left Output |
| Media Mapping Style | F |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Motor Frame Size | B9180TC210C |
| Media Mapping Output | G |
| Center Distance | 3 in |
| Output Torque @ RPM | 2024 in lb @ 1750 rpm, 2470 in lb @ 1150 rpm |
| Use With | 730 |
| Center Distance Code | 730 |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Bolt Center | 7 in x 4 in |
| Base Mounting Attachment | No Base |
| Input HP @ RPM | 2.68 hp @ 1150 rpm, 3.14 hp @ 1750 rpm |
| Input Power Rating | 3.14 hp, 2.341 kW |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Lubrication | None |
| Output Torque Rating Range [Max] | 2499 lb-in, 234 Nm |
| Box Width | 6 49/64 in |
| Output Torque | 2024 lb-in |
| Output Torque Rating Range [Min] | 2000 lb-in, 160 Nm |
| HP @ RPM | 3 hp @ 1800 rpm |
| Torque Out @ 1150 rpm | 2470 in lb |
| Washdown Duty | No |
| Material | Cast Iron, Standard Paint |
| Style | Right Angle |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Box Height | 8 7/8 in |
| Reduction Type | Single |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Fan Cooled | No |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Weight | 55.1 LB |
| EAN or UPC | 781711606971 |
