Boston Gear
F730-40-B7-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101792913
- 1.50 Input Motor hp
- 700 Series
- 3 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output (Shaft or Bore) Size | 1 1/4 in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Family Name | F |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Media Mapping Style | F |
| Material | Cast Iron, Standard Paint |
| Box Length | 8 1/8 in |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Input HP @ RPM | 1.46 hp @ 1150 rpm, 1.78 hp @ 1750 rpm |
| Output Torque @ RPM | 2041 in lb @ 1750 rpm, 2470 in lb @ 1150 rpm |
| Fan Cooled | No |
| Output Shaft Projection | Solid Right Output |
| Lubrication | None |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Center Distance Code | 730 |
| Housing Material | Cast Iron |
| Series | 700 |
| Frame | 140TC, 180C |
| Input Power Rating | 1.78 hp, 1.327 kW |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Frame Size | 140TC, 180C |
| Box Width | 6 49/64 in |
| Media Mapping Output | J |
| Washdown Duty | No |
| Input Configuration | C-Face Quilled |
| Bolt Center | 7 in x 4 in |
| Base Mounting Attachment | No Base |
| Center Distance | 3 in |
| Output Speed | 43.8 rpm |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Ratio | 40:1 |
| Motor Frame Size | B7140TC180C |
| Box Height | 8 7/8 in |
| Output Torque Rating Range [Max] | 2499 lb-in, 234 Nm |
| Torque Out @ 1750 rpm | 2041 in lb |
| Worm Position | Universal |
| Output Configuration | Right Output |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Style | Right Angle |
| Motor Application | General Purpose |
| Rated Efficiency | 80% |
| Output Torque | 2041 lb-in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Bore Shaft Dia. | 1.25 in |
| Reduction Type | Single |
| Output Shaft | Solid |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Input (Shaft or Bore) Size | 7/8 in |
| Torque Out @ 1150 rpm | 2470 in lb |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Standard | AGMA Service Class I |
| Use With | 730 |
| Input Motor HP | 1.50 |
| Output Torque Rating Range [Min] | 2000 lb-in, 160 Nm |
| Weight | 55.1 LB |
| EAN or UPC | 781711607176 |
