Find a Service Center
Boston Gear
F732-50E-B7-H
700 Series 50:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834496
- 1.50 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Configuration | C-Face Quilled |
| Motor HP | 1.5 hp |
| Style | Right Angle |
| Output Torque @ RPM | 2403 in lb @ 1750 rpm, 2450 in lb @ 1150 rpm |
| Base Mounting Attachment | No Base |
| Output Speed | 35 rpm |
| Rated Efficiency | 78% |
| Material | Cast Iron, Standard Paint |
| Bolt Center | 7 1/2 in x 4 in |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Box Width | 7 9/16 in |
| Box Length | 9 in |
| Frame Size | 140TC, 180C |
| Family Name | F |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Input HP @ RPM | 1.21 hp @ 1150 rpm, 1.7 hp @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Frame | 140TC, 180C |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Ratio | 50:1 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Media Mapping Style | F |
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Washdown Duty | No |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Bore Code | B7 |
| Input (Shaft or Bore) Size | 7/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Worm Position | Universal |
| Reduction Type | Single |
| Input Power Rating | 1.7 hp, 1.268 kW |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Shaft Assembly Code | H |
| Torque Out @ 1150 rpm | 2450 in lb |
| Output Configuration | Left & Right Output |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Motor Frame Size | B7140TC180C |
| Fan Cooled | No |
| Center Distance Code | 732 |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Output Torque | 2403 lb-in |
| Output Torque Rating Range [Min] | 2000 lb-in, 235 Nm |
| Standard | AGMA Service Class I |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Output Torque Rating Range [Max] | 2499 lb-in, 309 Nm |
| Output Bore Shaft Dia. | 1.375 in |
| Output Shaft | Solid |
| Input Motor HP | 1.50 |
| Media Mapping Output | H |
| Box Height | 9 3/8 in |
| Series | 700 |
| Housing Material | Cast Iron |
| Keyway Size | 3/16 x 3/32 |
| Max. Input HP @ 100 rpm | 0.19 hp |
| Output Shaft Projection | Solid Double Projecting Output |
| Torque Out @ 1750 rpm | 2403 in lb |
| Center Distance | 3.25 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Use With | 732 |
| Weight | 66.1 LB |
| EAN or UPC | 781711520789 |
