Find a Service Center
Boston Gear
F7713-15-B5-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805899
- 0.5 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Centerline of Output Shaft | 1.72 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Max. Input HP @ 100 rpm | 0.049 hp |
| Output Torque Rating Range [Min] | 300 lb-in, 10 Nm |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Output Speed | 116.7 rpm |
| Material | Cast Iron, Standard Paint |
| Bolt Pattern | 3.25 x 2 |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Worm Position | Universal |
| Output Configuration | Left Output |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Motor Application | General Purpose |
| Input (Shaft or Bore) Size | 5/8 in |
| Base Mounting Attachment | No Base |
| Torque Out @ 1150 rpm | 262 in lb |
| Output Shaft | Solid |
| Output Shaft Projection | Solid Left Output |
| Housing Material | Cast Iron |
| Center Distance | 1.33 in |
| Input Motor HP | 0.50 |
| Output Torque @ RPM | 305 in lb @ 1750 rpm, 262 in lb @ 1150 rpm |
| Output Bore Shaft Dia. | 0.625 in |
| Rated Efficiency | 86% |
| Shaft Assembly Code | G |
| Bore Code | B5 |
| Base | No |
| Ratio | 15:1 |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| HP @ RPM | 0.5 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Box Length | 4 1/4 in |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Media Mapping Style | F |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Input Power Rating | 0.66 hp, 0.492 kW |
| Frame | 56C |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Box Width | 4.03 in |
| Lubrication | None |
| Reduction Type | Single |
| Use With | 713 |
| Input HP @ RPM | 0.66 hp @ 1750 rpm, 0.37 hp @ 1150 rpm |
| Box Height | 4 21/32 in |
| Fan Cooled | No |
| Output (Shaft or Bore) Size | 5/8 in |
| Frame Size | 56C |
| Family Name | F |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Torque Out @ 1750 rpm | 305 in lb |
| Motor HP | 1/2 hp |
| Washdown Duty | No |
| Series | 700 |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Output Torque | 305 lb-in |
| Bolt Center | 3 1/4" x 2" |
| Input Configuration | C-Face Quilled |
| Standard | AGMA Service Class II |
| Center Distance Code | 713 |
| Style | Right Angle |
| Motor Frame Size | B556C |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Output Torque Rating Range [Max] | 499 lb-in, 34 Nm |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Media Mapping Output | G |
| Weight | 13.1 LB |
| EAN or UPC | 781711518762 |
