Find a Service Center
Boston Gear
F7713-30-B5-H
700 Series 30:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805900
- 0.33 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Rated Efficiency | 74% |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Box Height | 4 21/32 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Media Mapping Style | F |
| Input Configuration | C-Face Quilled |
| Bore Code | B5 |
| Frame Size | 56C |
| Series | 700 |
| Housing Material | Cast Iron |
| Base to Centerline of Input Shaft | 3.0625 in |
| Output Configuration | Left & Right Output |
| Center Distance Code | 713 |
| Worm Position | Universal |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Output Speed | 58.3 rpm |
| Output (Shaft or Bore) Size | 5/8 in |
| Max. Input HP @ 100 rpm | 0.029 hp |
| Output Torque | 311 lb-in |
| Bolt Center | 3 1/4" x 2" |
| Washdown Duty | No |
| Use With | 713 |
| Output Torque @ RPM | 270 in lb @ 1150 rpm, 311 in lb @ 1750 rpm |
| Motor Application | General Purpose |
| Torque Out @ 1750 rpm | 311 in lb |
| Input Motor HP | 0.33 |
| Standard | AGMA Service Class I |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Motor HP | 1/4 hp |
| Style | Right Angle |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Input Power Rating | 0.39 hp, 0.291 kW |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm |
| Fan Cooled | No |
| Box Length | 4 1/4 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Family Name | F |
| Media Mapping Output | H |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Output Bore Shaft Dia. | 0.625 in |
| Input HP @ RPM | 0.21 hp @ 1150 rpm, 0.39 hp @ 1750 rpm |
| Box Width | 4.03 in |
| Motor Frame Size | B556C |
| Input (Shaft or Bore) Size | 5/8 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft | Solid |
| Frame | 56C |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Base to Centerline of Output Shaft | 1.72 in |
| Shaft Assembly Code | H |
| Torque Out @ 1150 rpm | 270 in lb |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Ratio | 30:1 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Base | No |
| Material | Cast Iron, Standard Paint |
| Base Mounting Attachment | No Base |
| Lubrication | None |
| Center Distance | 1.33 in |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Reduction Type | Single |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Keyway Size | 3/16 x 3/32 |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Weight | 13.1 LB |
| EAN or UPC | 781711518861 |
