Find a Service Center
Boston Gear
F7713-30-B5-H
700 Series 30:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805900
- 0.33 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Family Name | F |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Torque Out @ 1750 rpm | 311 in lb |
| Motor Frame Size | B556C |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Bolt Center | 3 1/4" x 2" |
| Bore Code | B5 |
| Torque Out @ 1150 rpm | 270 in lb |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Series | 700 |
| Center Distance | 1.33 in |
| Housing Material | Cast Iron |
| Use With | 713 |
| Standard | AGMA Service Class I |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Output (Shaft or Bore) Size | 5/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Input HP @ RPM | 0.21 hp @ 1150 rpm, 0.39 hp @ 1750 rpm |
| Output Shaft Projection | Solid Double Projecting Output |
| Base | No |
| Output Torque | 311 lb-in |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm |
| Output Speed | 58.3 rpm |
| Output Configuration | Left & Right Output |
| Base to Centerline of Output Shaft | 1.72 in |
| Keyway Size | 3/16 x 3/32 |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Reduction Type | Single |
| Motor HP | 1/4 hp |
| Box Length | 4 1/4 in |
| Ratio | 30:1 |
| Input (Shaft or Bore) Size | 5/8 in |
| Material | Cast Iron, Standard Paint |
| Max. Input HP @ 100 rpm | 0.029 hp |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Frame | 56C |
| Lubrication | None |
| Box Width | 4.03 in |
| Rated Efficiency | 74% |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Washdown Duty | No |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Base to Centerline of Input Shaft | 3.0625 in |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Center Distance Code | 713 |
| Shaft Assembly Code | H |
| Media Mapping Output | H |
| Worm Position | Universal |
| Output Shaft | Solid |
| Frame Size | 56C |
| Output Torque @ RPM | 270 in lb @ 1150 rpm, 311 in lb @ 1750 rpm |
| Input Power Rating | 0.39 hp, 0.291 kW |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Output Bore Shaft Dia. | 0.625 in |
| Fan Cooled | No |
| Style | Right Angle |
| Box Height | 4 21/32 in |
| Input Motor HP | 0.33 |
| Media Mapping Style | F |
| Weight | 13.1 LB |
| EAN or UPC | 781711518861 |
