Find a Service Center
Boston Gear
F7715-10-B5-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #100848242
- 1 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Style | Right Angle |
| Standard | AGMA Service Class I |
| Keyway Size | 3/16 x 3/32 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Output Configuration | Left & Right Output |
| Family Name | F |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Series | 700 |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Base Mounting Attachment | No Base |
| Base to Centerline of Output Shaft | 1.91 in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Shaft Projection | Solid Double Projecting Output |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Base | No |
| Reduction Type | Single |
| Box Height | 5 3/8 in |
| Output Speed | 175 rpm |
| Material | Cast Iron, Standard Paint |
| Input HP @ RPM | 0.73 hp @ 1150 rpm, 1.2 hp @ 1750 rpm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Input Power Rating | 1.2 hp, 0.895 kW |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output Bore Shaft Dia. | 0.75 in |
| Lubrication | None |
| Motor Application | General Purpose |
| Motor Frame Size | B556C |
| Media Mapping Style | F |
| Bore Code | B5 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Input Motor HP | 1 |
| Output Shaft | Solid |
| Output Torque | 397 lb-in |
| Output (Shaft or Bore) Size | 3/4 in |
| Rated Efficiency | 92% |
| Frame | 56C |
| Output Torque @ RPM | 350 in lb @ 1150 rpm, 397 in lb @ 1750 rpm |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Torque Out @ 1150 rpm | 350 in lb |
| Torque Out @ 1750 rpm | 397 in lb |
| Housing Material | Cast Iron |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Box Width | 5 1/16 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Box Length | 5 1/8 in |
| Media Mapping Output | H |
| Shaft Assembly Code | H |
| Fan Cooled | No |
| Motor HP | 1 hp |
| Washdown Duty | No |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Use With | 715 |
| Frame Size | 56C |
| Input Configuration | C-Face Quilled |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Center Distance | 1.54 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Center Distance Code | 715 |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Ratio | 10:1 |
| Input (Shaft or Bore) Size | 5/8 in |
| Weight | 17.1 LB |
| EAN or UPC | 781711519011 |
