Find a Service Center
Boston Gear
F7715-10-B5-J
700 Series 10:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834958
- 1 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Center Distance | 1.54 in |
| Media Mapping Style | F |
| Torque Out @ 1150 rpm | 350 in lb |
| Output Torque | 397 lb-in |
| Motor HP | 1 hp |
| Box Length | 5 1/8 in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Bore Code | B5 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Box Height | 5 3/8 in |
| Washdown Duty | No |
| Torque Out @ 1750 rpm | 397 in lb |
| Frame | 56C |
| Base to Centerline of Output Shaft | 1.91 in |
| Input Configuration | C-Face Quilled |
| Family Name | F |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Input Motor HP | 1 |
| Output Bore Shaft Dia. | 0.75 in |
| Output Shaft | Solid |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Lubrication | None |
| Reduction Type | Single |
| Use With | 715 |
| HP @ RPM | 1 hp @ 1800 rpm |
| Fan Cooled | No |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Motor Application | General Purpose |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Input HP @ RPM | 1.2 hp @ 1750 rpm, 0.73 hp @ 1150 rpm |
| Ratio | 10:1 |
| Motor Frame Size | B556C |
| Input Power Rating | 1.2 hp, 0.895 kW |
| Box Width | 5 1/16 in |
| Media Mapping Output | J |
| Rated Efficiency | 92% |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Output (Shaft or Bore) Size | 3/4 in |
| Housing Material | Cast Iron |
| Input (Shaft or Bore) Size | 5/8 in |
| Center Distance Code | 715 |
| Standard | AGMA Service Class I |
| Output Configuration | Right Output |
| Keyway Size | 3/16 x 3/32 |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output Torque @ RPM | 397 in lb @ 1750 rpm, 350 in lb @ 1150 rpm |
| Style | Right Angle |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Shaft Assembly Code | J |
| Frame Size | 56C |
| Max. Thrust Load @ RPM | 400 lb/in @ 1750 rpm, 400 lb/in @ 1150 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Output Shaft Projection | Solid Right Output |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Base | No |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Output Speed | 175 rpm |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Series | 700 |
| Material | Cast Iron, Standard Paint |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Weight | 17.1 LB |
| EAN or UPC | 781711519028 |
