Find a Service Center
Boston Gear
F7715-40-B5-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835796
- 0.33 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Power Rating | 0.43 hp, 0.321 kW |
| Media Mapping Output | H |
| Center Distance | 1.54 in |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Reduction Type | Single |
| Motor Application | Washdown Duty |
| Base Mounting Attachment | No Base |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Shaft Assembly Code | H |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Family Name | F |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Material | Cast Iron, Standard Paint |
| Rated Efficiency | 71% |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Box Length | 5 1/8 in |
| Media Mapping Style | F |
| Output Speed | 43.8 rpm |
| Housing Material | Cast Iron¦White Epoxy Coating |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Input Motor HP | 0.33 |
| Output Torque | 442 lb-in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Series | 700 |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Washdown Duty | Yes |
| Output Shaft Projection | Solid Double Projecting Output |
| Bore Code | B5 |
| Keyway Size | 3/16 x 3/32 |
| Lubrication | None |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input Configuration | C-Face Quilled |
| Output Shaft | Solid |
| Output (Shaft or Bore) Size | 3/4 in |
| Base | No |
| Motor HP | 0.3333 hp |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Standard | AGMA Service Class II |
| Frame Size | 56C |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Use With | 715 |
| Output Configuration | Left & Right Output |
| Fan Cooled | No |
| Center Distance Code | 715 |
| Worm Position | Universal |
| Output Torque @ RPM | 380 in lb @ 1150 rpm, 441 in lb @ 1750 rpm |
| Output Bore Shaft Dia. | 0.75 in |
| Ratio | 40:1 |
| Base to Centerline of Output Shaft | 1.91 in |
| Torque Out @ 1150 rpm | 380 in lb |
| Box Height | 5 3/8 in |
| Frame | 56C |
| Box Width | 5 1/16 in |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Style | Right Angle |
| Motor Frame Size | B556C |
| Torque Out @ 1750 rpm | 441 in lb |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.036 hp |
| Weight | 17.1 LB |
| EAN or UPC | 781711519165 |
