Find a Service Center
Boston Gear
F7715-5-B5-G
700 Series 5:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809374
- 1.50 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Torque Out @ 1750 rpm | 291 in lb |
| Box Length | 5 1/8 in |
| Style | Right Angle |
| Reduction Type | Single |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Output Torque | 291 lb-in |
| Input (Shaft or Bore) Size | 5/8 in |
| Motor Application | General Purpose |
| Rated Efficiency | 94% |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Motor HP | 1 hp |
| Frame Size | 56C |
| Output Speed | 350 rpm |
| Washdown Duty | No |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Center Distance Code | 715 |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Fan Cooled | No |
| Series | 700 |
| Ratio | 5:1 |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Output Torque @ RPM | 291 in lb @ 1750 rpm, 285 in lb @ 1150 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Output Shaft Projection | Solid Left Output |
| Frame | 56C |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Center Distance | 1.54 in |
| Media Mapping Style | F |
| Lubrication | None |
| Box Width | 5 1/16 in |
| Base to Centerline of Output Shaft | 1.91 in |
| Media Mapping Output | G |
| Output (Shaft or Bore) Size | 3/4 in |
| Worm Position | Universal |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Input Configuration | C-Face Quilled |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Motor Frame Size | B556C |
| Input Power Rating | 1.72 hp, 1.283 kW |
| Base | No |
| Torque Out @ 1150 rpm | 285 in lb |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Bore Code | B5 |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Input HP @ RPM | 1.72 hp @ 1750 rpm, 1.15 hp @ 1150 rpm |
| Housing Material | Cast Iron |
| Family Name | F |
| Output Shaft | Solid |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Output Configuration | Left Output |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Box Height | 5 3/8 in |
| Output Bore Shaft Dia. | 0.75 in |
| Standard | AGMA Service Class I |
| Material | Cast Iron, Standard Paint |
| Input Motor HP | 1.50 |
| Use With | 715 |
| Max. Thrust Load @ RPM | 400 lb/in @ 1750 rpm, 400 lb/in @ 1150 rpm |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Weight | 17.1 LB |
| EAN or UPC | 781711518946 |
| NSN Number | 6105-01-361-8350 |
