Boston Gear
F7718-10-B5-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835122
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Fan Cooled | No |
| Motor HP | 1 hp |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Bore Code | B5 |
| Base Mounting Attachment | No Base |
| Center Distance Code | 718 |
| Material | Cast Iron, Standard Paint |
| Reduction Type | Single |
| Input Motor HP | 1.50 |
| Housing Material | Cast Iron |
| Output Shaft | Solid |
| Center Distance | 1.75 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Ratio | 10:1 |
| Output Torque | 536 lb-in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Lubrication | None |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Media Mapping Style | F |
| Standard | AGMA Service Class I |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Series | 700 |
| Output Configuration | Left & Right Output |
| Box Length | 5 1/2 in |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Use With | 718 |
| Motor Frame Size | B556C |
| Box Width | 5 1/32 in |
| Rated Efficiency | 92% |
| Shaft Assembly Code | H |
| Box Height | 5 3/4 in |
| Output Speed | 175 rpm |
| Frame | 56C |
| HP @ RPM | 1 hp @ 1800 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Washdown Duty | No |
| Media Mapping Output | H |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Torque Out @ 1150 rpm | 480 in lb |
| Motor Application | General Purpose |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Input Configuration | C-Face Quilled |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Keyway Size | 3/16 x 3/32 |
| Output Bore Shaft Dia. | 0.875 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Worm Position | Universal |
| Torque Out @ 1750 rpm | 536 in lb |
| Output (Shaft or Bore) Size | 7/8 in |
| Style | Right Angle |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Base | No |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Frame Size | 56C |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Family Name | F |
| Weight | 19.1 LB |
| EAN or UPC | 781711519288 |
