Boston Gear
F7718-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809112
- 0.5 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Torque Out @ 1150 rpm | 525 in lb |
| HP @ RPM | 0.3333333 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Motor Frame Size | B556C |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Output Torque | 609 lb-in |
| Fan Cooled | No |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Center Distance Code | 718 |
| Output Shaft | Solid |
| Input (Shaft or Bore) Size | 5/8 in |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Housing Material | Cast Iron |
| Input Motor HP | 0.50 |
| Max. Input HP @ 100 rpm | 0.052 hp |
| Output Bore Shaft Dia. | 0.875 in |
| Output Speed | 43.8 rpm |
| Base Mounting Attachment | No Base |
| Rated Efficiency | 74% |
| Frame | 56C |
| Output RPM @ 1750 rpm Input | 44 rpm |
| Input Configuration | C-Face Quilled |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Media Mapping Output | J |
| Reduction Type | Single |
| Input Power Rating | 0.57 hp, 0.425 kW |
| Media Mapping Style | F |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Torque Out @ 1750 rpm | 609 in lb |
| Washdown Duty | No |
| Input HP @ RPM | 0.57 hp @ 1750 rpm, 0.33 hp @ 1150 rpm |
| Ratio | 40:1 |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Output Configuration | Right Output |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output Torque @ RPM | 609 in lb @ 1750 rpm, 525 in lb @ 1150 rpm |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Base | No |
| Frame Size | 56C |
| Use With | 718 |
| Motor HP | 0.3333 hp |
| Shaft Assembly Code | J |
| Worm Position | Universal |
| Output (Shaft or Bore) Size | 7/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Box Height | 5 3/4 in |
| Material | Cast Iron, Standard Paint |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Bore Code | B5 |
| Style | Right Angle |
| Keyway Size | 3/16 x 3/32 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Family Name | F |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Motor Application | General Purpose |
| Series | 700 |
| Center Distance | 1.75 in |
| Lubrication | None |
| Box Width | 5 1/32 in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Box Length | 5 1/2 in |
| Output Shaft Projection | Solid Right Output |
| Weight | 19.1 LB |
| EAN or UPC | 781711519448 |
