Boston Gear
F7721-15-B5-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834959
- 1.50 Input Motor hp
- 700 Series
- 2.06 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Media Mapping Style | F |
| Washdown Duty | No |
| Base | No |
| Family Name | F |
| Max. Thrust Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Torque Out @ 1150 rpm | 752 in lb |
| Ratio | 15:1 |
| Base to Centerline of Output Shaft | 2.28 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.88 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Center Distance Code | 721 |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 8.63 x 2.63 |
| Max. Overhung Load @ 1750 rpm | 700 lb/in |
| Input Motor HP | 1.50 |
| Motor HP | 0.75 hp |
| Output Speed | 116.7 rpm |
| Series | 700 |
| Max. Thrust Load @ 1150 rpm | 700 lb/in |
| Material | Cast Iron, Standard Paint |
| Fan Cooled | No |
| Style | Right Angle |
| Base to Centerline of Input Shaft | 4 11/32 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.13 in |
| Worm Position | Universal |
| Standard | AGMA Service Class I |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Lubrication | None |
| Output Torque | 841 lb-in |
| Motor Frame Size | B556C |
| Bore Code | B5 |
| Keyway Size | 3/16 x 3/32 |
| Bolt Centers w/ Vertical Base Kits (in) | 8 3/8 x 4 7/8 |
| Media Mapping Output | H |
| Max. Overhung Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Frame Size | 56C |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output (Shaft or Bore) Size | 1 in |
| Motor Application | General Purpose |
| Shaft Assembly Code | H |
| Use With | 721 |
| Bolt Centers w/ Std. Base Kit (in) | 6 3/8 x 4 11/16 |
| Output Configuration | Left & Right Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.94 in |
| Box Width | 5 3/16 in |
| Rated Efficiency | 90% |
| Output Bore Shaft Dia. | 1 in |
| Max. Input HP @ 100 rpm | 0.13 hp |
| Input Configuration | C-Face Quilled |
| Input Power Rating | 1.72 hp, 1.283 kW |
| Output Torque @ RPM | 752 in lb @ 1150 rpm, 840 in lb @ 1750 rpm |
| Input HP @ RPM | 1.06 hp @ 1150 rpm, 1.72 hp @ 1750 rpm |
| Bolt Center | 5 in x 2 7/8 in |
| Center Distance | 2.0625 in |
| Output Torque Rating Range [Max] | 999 lb-in, 109 Nm |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Torque Out @ 1750 rpm | 840 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 4.81 in |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Min] | 750 lb-in, 85 Nm |
| Box Length | 6 in |
| Reduction Type | Single |
| Frame | 56C |
| Output Shaft | Solid |
| Housing Material | Cast Iron |
| Box Height | 6 3/8 in |
| Weight | 24.1 LB |
| EAN or UPC | 781711519615 |
