Find a Service Center
Boston Gear
F7724-15-B7-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809115
- 2 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Fan Cooled | No |
| Input Motor HP | 2 |
| Input (Shaft or Bore) Size | 7/8 in |
| Motor HP | 2 hp |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Output Speed | 116.7 rpm |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Rated Efficiency | 92% |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Bore Shaft Dia. | 1.125 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Motor Application | General Purpose |
| Torque Out @ 1150 rpm | 1060 in lb |
| Worm Position | Universal |
| Input Configuration | C-Face Quilled |
| Output Shaft Projection | Solid Left Output |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input HP @ RPM | 1.51 hp @ 1150 rpm, 2.34 hp @ 1750 rpm |
| Motor Frame Size | B7140TC180C |
| Material | Cast Iron, Standard Paint |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Washdown Duty | No |
| Center Distance Code | 724 |
| Output Configuration | Left Output |
| Box Width | 5 7/16 in |
| Media Mapping Style | F |
| Frame Size | 140TC, 180C |
| Max. Input HP @ 100 rpm | 0.19 hp |
| Ratio | 15:1 |
| Box Length | 6 3/8 in |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Use With | 724 |
| Shaft Assembly Code | G |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Frame | 140TC, 180C |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Output Torque @ RPM | 1060 in lb @ 1150 rpm, 1159 in lb @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Bore Code | B7 |
| Reduction Type | Single |
| Style | Right Angle |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Housing Material | Cast Iron |
| Bolt Center | 5 in x 2 7/8 in |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Box Height | 6 15/16 in |
| Media Mapping Output | G |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Center Distance | 2.375 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Torque Out @ 1750 rpm | 1159 in lb |
| Lubrication | None |
| Input Power Rating | 2.34 hp, 1.745 kW |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Series | 700 |
| Output Torque | 1159 lb-in |
| Output Shaft | Solid |
| Family Name | F |
| Standard | AGMA Service Class I |
| Weight | 30.1 LB |
| EAN or UPC | 781711519905 |
